1·High aromatic hydrocarbon oil could be dissolved easily in the high Mooney viscosity BR.
高芳烃油与高门尼黏度顺丁橡胶胶液的相溶性较好；
2·The Mooney viscosity fluctuation of mix can be decreased by using instantaneous power control.
采用瞬时功率控制可减小混炼胶的门尼粘度波动。
3·The influence of peptizer B on Mooney viscosity, plasticity and heat aging property of NR was investigated.
研究塑解剂B对nr门尼粘度、塑性和热老化性能的影响。
4·The effect of raw SIBR Mooney viscosity on the properties of mix and vulcanizate was investigated and compared to that of SSBR1204.
研究不同门尼粘度的集成橡胶（SIBR）混炼胶和硫化胶的各项性能，并与溶聚丁苯橡胶（SSBR1204）进行对比。
5·The controlled items mainly consist of feed quantity, reaction temperature, catalyst usage and ratio, conversion rate and polymer Mooney viscosity.
控制项目主要包括进料量、反应温度、催化剂用量及配比、单体转化率、聚合物门尼粘度控制。
6·The influence of the sol Mooney viscosity, the gel proportion and the accelerator type on the tensile strength of precrosslinked CR vulcanizate was studied.
研究了预交联型CR 溶胶组分的门尼粘度、 凝胶组分所占比例以及硫化促进剂种类对其硫化后拉伸强度的影响。
7·Under these conditions, a production plant can be able to produce polybutadiene with appropriate Mooney viscosity and cis-structure content greater than 98%.
在此条件下，可以制备出既具有合适的门尼黏度值、顺式结构含量又大于98%的聚丁二烯。
8·The results showed that the catalyst system had high catalytic activity and good catalytic stability, and the Mooney viscosity of BR could be adjusted sensitively.
结果表明 ，该体系催化活性高 ， 稳定性好 ，能灵敏地 调节顺丁橡胶的门尼黏度 ；
9·Polymerization control is the control of polymerization activity and polymer Mooney viscosity, namely the production capacity and product quality control during polymerization.
聚合过程控制为聚合活性与聚合物门尼粘度的控制，即聚合过程生产能力与产品质量的控制。
10·The blend properties of chloroprene rubber(CR) and trans1,4-polyisoprene(TPI)with different mooney viscosity were studied, and the vulcanizate properties of CR/TPI and CR were compared.
研究了不同门尼粘度的反式- 1，4- 聚异戊二烯（T PI）与氯丁橡胶（ CR）并用胶的性能，并对比了CR/TPI与CR 硫化胶的性能。