1·The stability of hydrolysis and adhesion strength of PU are not good.
聚氨酯的水解稳定性较差，粘结强度偏低。
2·The sample was characterized by melt flow rate and adhesion strength to aluminum.
用熔体流动速度和粘结强度表示试样的特征。
3·High refractive index, high transparency and good adhesion strength for PET film.
具有高折射率、高透明度、对已处理的PET有较佳的附著力。
4·The adhesion strength and stripping and splitting prevention measure were also discussed.
同时研究了涂料的粘附强度、防裂、防剥落等措施。
5·The peel and the adhesion strength of various solidification fraction of the ETPB were studied.
本文研究ETPB固化剂加入量对粘接和剥离强度的影响。
6·The adhesion strength development between PCM and commencement mortar has been studied in this test.
本文研究了聚合物水泥砂浆(PCM)与普通水泥砂浆之间的粘接强度。
7·Adhesion strength of diamond films on cemented carbide were evaluated by Rockwell indentation tests.
扫描电镜观察表面金刚石形貌，洛氏硬度压痕法评价涂层结合情况。
8·The diffusion of Ti, c, W of the substrate into the film improved the adhesion strength of the interface.
基体中的元素在薄膜中有明显的扩散，有助于提高界面结合强度。
9·The matrix of Chinese Medicine Patcher was studied by uniform design and taking adhesion strength as index.
采用均匀设计法，以粘着强度为指标，筛选中药巴布剂基质。
10·The fracture of the pins was caused by improper assembly flow and lower adhesion strength of the fixing glue.
装配方式不合理，固定胶粘接强度不足和工艺不完善是导致引脚断裂的原因。