1·Gas pipelines have a single role of booster pumps and pump dual role.
气体管道增压泵有单作用泵和双作用泵。
2·Use: May serve as the transmission in the oil transfer system, the booster pump.
在真空系统中，这种泵可单独使用，或作为增压泵、扩散泵等的前级泵。
3·The vacuum system utilizes two vacuum pumps and one booster pump to achieve a vacuum.
真空系统采用两台真空泵和一台罗茨泵来实现真空。
4·A booster pump, used to increase the sterilization machine into this machine inlet pressure.
一台增压泵，用于增加杀菌机进入本机的进口压力。
5·First, the district Guoku Chu construction of a booster pump station, on the water pressure.
一是在区国库处建一加压泵站，对自来水加压。
6·Buffering Butterfly Check Valve is more suitable for use in the by pass of booster pump station.
蝶式缓冲止回阀是一种较为理想的直抽式加压泵站旁路止回阀。
7·The present situation and advance in development of a spiral grooved turbo booster pump are reviewed.
综述了涡轮分子增压泵的研究现状与进展。
8·The following small series for you to explain about the typical application of inert gas booster pump.
下面小编为您讲解一下惰性气体增压泵的典型应用。
9·It can be used alone, but also as a booster pump, the proliferation of pumps, pump-pump using the former.
它可以单独使用，也可作为增压泵、扩散泵、分子泵的前级泵使用。
10·It can be used alone, can also be used as booster pumps, diffusion pumps, molecular pumps pump before use.
它可以单独使用，也可作为增压泵、扩散泵、分子泵的前级泵使用。
1·The paper analyzes the construction, performance and working principle of SC pneumatic booster pump, and introduces its application in the hydraulic system of aluminum strip casting-rolling mill.
本文深入分析SC气动增压泵的结构、性能和工作机理，详细介绍其在铝带铸轧机液压控制系统中的应用。
2·The following small series for you to explain about the typical application of inert gas booster pump.
下面小编为您讲解一下惰性气体增压泵的典型应用。
3·A booster pump, used to increase the sterilization machine into this machine inlet pressure.
一台增压泵，用于增加杀菌机进入本机的进口压力。
4·The one-level turbine engine with one pump is composed of a turbine, a turbine shaft, a booster pump wheel and an expansion chamber shell.
一泵一级涡轮发动机由涡轮、涡轮轴、增压泵轮和膨胀室壳体组成。
5·S with signal output port: by electronic control in the mainboard to often open and closed, public three port fuses can external electromagnetic valve or booster pump.
带有信号输出端口：由电子控制主板里的常开、常闭、公共三个端口引线可外接电磁阀或增压泵。