1·Introducing the method of effective ratio of width to thickness by considering post buckling strength of channel sections in press.
介绍一种考虑薄壁槽钢受压局部屈曲后强度的有效宽厚比法。
2·The inner cylinder may therefore be formed thin and small in diameter and particularly the stretched inner cylinder is high in buckling strength.
于是，能形成薄壁小直径的内筒，特别是可以延伸，从而提高了轴向的压曲强度。
3·Considering the membrane effect of plates, the design of profiled steel sheets allows local buckling of plates, and can utilize post - buckling strength.
由于板件的薄膜效应，压型钢板的设计不仅答应板件出现局部屈曲，而且还可以利用屈曲后强度。
4·When a beam flange is coped at the connection, the lateral buckling strength of the coped beam could be significantly less than that predicted by current formulas.
在切去梁翼后(简称切口)梁的侧向屈曲强度会比通常采用的设计理论所计算的强度大大降低。
5·Allowed the local buckling of elements and made use of the post-buckling strength, the effective width method is often used to calculate the load-carrying capacity.
为了用料经济，允许板件产生局部失稳，其承载能力以利用板的屈曲后强度为特点的“有效宽度”方法来计算。
6·It is found that the buckling strength of column-supported silos is mainly dependent on the height of the engaged column, which also affects the buckling deformation mode.
研究表明，支柱伸入高度是影响仓壁柱承筒仓屈曲强度的主要因素，屈曲模态也与之密切相关。
7·The results prove that when the edge length keeps constant, the buckling strength decreases quickly with the increasing height, while the resonant frequency rises after an initial decline.
结果表明，当蜂窝边长一定时，随着蜂窝高度的增加，屈曲强度迅速下降，共振频率先下降后升高；
8·For the code revising, some important conclusions have been drawn through the theoretical analysis and experimental research of the post-buckling strength of web plates of I-section girder.
通过对焊接工字梁腹板屈曲后强度的理论分析及试验研究，得出了一些对规范修订有重要参考价值的结论。
9·The energy method is used to calculate the buckling strength of the stitched composite laminates, and the minimal potential energy is used to calculate that of the unstitched composite laminates.
采用最小势能原理计算了缝纫及未缝纫复合材料层合板的屈曲强度。
10·The paper describes basic methods and analytical approach of buckling strength assessment of oil tank structure in detail, basing on technical specifications of buckling strength in "Common Rules".
本文根据《共同规范》关于屈曲强度的技术要求，详细地阐述了油船结构屈曲强度评估的基本方法和分析步骤。