1·Advances of cobalt alloy electroplating at home and abroad in recent years is reviewed.
综述了近年来国内外在电镀钴合金方面的研究进展。
2·The current nuclear valve sealing surface surfacing material is generally cobalt alloy.
目前核阀密封面堆焊材料一般均为含钴合金。
3·The field performance and life are identical with traditional integral cobalt alloy pad.
现场使用性能及寿命均和传统整体钴合金垫块相同。
4·Zinc and cobalt content in zinc cobalt alloy plating bath are determined by the combined method of titration with EDTA and spectrophotometry.
采用EDTA滴定和分光光度相结合的方法测定碱性锌钴合金镀液中的锌、钴含量。
5·The results indicate that every performance of melting range reaches or surpasses respective performance of related cobalt alloy and Ni Cr alloy.
结果表明，熔接区的各项性能均达到和超过相关的钴合金及镍铬高温合金的各自性能。
6·Composite electrodeposits of nickel-cobalt-tungsten carbide were prepared by adding tungsten carbide particles in the nickel-cobalt alloy solution.
研究了在镍钴合金镀液中加入碳化钨微粒形成镍-钴-碳化钨复合镀层的共沉积过程。
7·Artificial hydroxyl apatite powder with high purity is applied onto the surface of the registered artificial joints made of titanium and cobalt alloy.
采用人工合成高纯度的羟基磷灰石粉末，喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。
8·The good electrochemical performance shows that the highly dispersed tin and tin-cobalt alloy composites may be promising anode materials for lithium ion batteries.
良好的电化学性能表明高分散锡和锡钴合金复合材料有望成为锂离子电池负极材料。
9·Zinc and cobalt content in zinc cobalt alloy plating bath should be maintained in a suitable range so that corrosion resistant zinc cobalt alloy deposit can be obtained.
为获得耐蚀性良好的锌钴合金镀层，必须维持镀液中的锌钴含量在工艺范围内。
10·The character of the tin-cobalt alloy coating, properties of the bath, influence of the impurities in the bath, troubleshooting and wastewater treatment are also studied.
研究了锡钴合金镀层的基本特性、镀液的性能、镀液中杂质的影响及故障处理和废水治理。