1·The Effects of the content of the non-condensable gas and the condensing pressure on the overall condensation heat transfer was tested.
通过对水平管束管间冷凝换热特性的试验研究 ，探讨并分析了冷却水流量以及不凝气体质量分数对管束冷凝换热的影响规律和机理 。
2·Thirdly, defrosting electromagnetic valve is arranged on the machine table, is used to control the machine condensing pressure, avoid machine low pressure evaporator condensate, causing ice jam.
化霜电磁阀安装在机台内，用于控制机台的冷凝压力，避免机台冷凝压力过低，造成蒸发器冰堵。
3·It is ripe in technology and doable in practice that one old condensing turbine with proper parameter is remade to be postposition turbine of the back extraction pressure turbine.
选取参数适当的旧凝汽式机组改造为背压机组的后置机在技术上是成熟的，在实际应用上也是可行的。
4·The effect of reaction temperature, reaction pressure, catalyst concentration, ammonia circulation rate, condensing temperature on fatty nitriles reaction rate, yield, energy demand are discussed.
讨论反应温度、反应压力、催化剂的浓度、氨循环速率、冷凝温度对脂肪晴的反应速率、得率、能量消耗的影响。
5·Air condenser - For the condensing coil in the high side of Refrigeration System. high temperature and high pressure steam is cooled into saturated super cooled liquid in the condenser.
冷凝器应用—用于制冷高压侧的冷凝盘管，高温高压蒸汽在冷凝器中冷却为饱和过冷状态的液体。
6·Using the laser testing system of soluble solid deposition developed by themselves, the wax-condensing temperature of equilibrium oil of condensate gas is tested under different pressure.
文章利用自行开发的固溶物沉积激光测试系统，测试了凝析气平衡油在不同压力下的析蜡温度。
7·Back pressure higher than 80%, to row non-condensing gas, diaphragm solid, long life, easy maintenance, using a wide range.
背压率大于80%，能排不凝结气体，膜盒坚固，使用寿命长，维修方便，使用范围很广。
8·Here an example is: heating the feedwater of condensing turbine by exhaust steam of a back pressure turbine (through tubular steam cooler) to raise the set's heat economy.
介绍一例：利用管式蒸汽冷却器将背压机排汽加热凝汽机给水，从而提高机组热经济性。
9·The device thoughts and modification progress that modified one cylinder with high pressure, condensing steam turbine to a extraction and supplying heater ones are introduced.
介绍将高压单缸凝汽式汽轮机改造为抽汽供热式机组的设计思路及施工改造过程。