1·The compressive strength also varied with the curing time.
养护时间不同，其抗压强度有明显的差异。
2·However, the lower temperature, the longer the curing time.
随着温度的进一步降低，环氧树脂的固化更趋缓慢。
3·The curing time of the mid-coat should be more than 8 hours.
中涂层养护硬化时间约为8小时以上；
4·Take the average temperature in the curing time as curing temperature.
养护温度取各湿喷桩养护期的平均气温。
5·To assess the two groups, clinical therapeutic effects and the curing time .
对两组临床疗效及治愈时间进行评定。
6·The effects of curing time, temperature and bleeding capacity on ice-formation pressure of grout were studied.
研究了养护温度、时间及泌水率对灌浆材料结冰压的影响。
7·Compared with the chemically cured adhesives, it is convenient for practical use, and its curing time is short.
与化学固化粘合剂相比，其操作使用方便，固化时间短。
8·It can be quicky cured and resisted high temperature for class H in a short curing time and low evaporation losses.
它耐高温达到H级，固化速度快，贮存周期长，挥发率低。
9·Automatic pressure compensation, adjust the time and deflated deflated the number of heating temperature, curing time.
可自动压力补偿、调节放气时间和放气次数、加热温度、硫化时间等。
10·The composition provides improved and reproducible flow during the early stages of molding without compromising curing time.
该组合物在成型的早期阶段提供改善的和可重现的流动而不损害固化时间。