1·Screw bat of feed hopper abopted with alloysteel, special handing on surface, durabie in heat, wear and corrosion.
螺杆料筒采用优质合金钢，表面氮化处理，耐热、耐磨、耐腐蚀。
2·The working part: It consists of feed hopper, cropping chamber , discharging board and 18 pieces of stationary knife.
工作室部分：主要由进料斗， 切料室，出料板及18支定刀组成。
3·The Series ER features a modular design making it possible to combine driving block, trough and feed hopper in different ways.
ER型定量给料输送槽的优点是采用模块化设计，驱动模块、输送槽和给料料斗等可以按照不同的方式进行组合。
4·Jin, a device: from the feed hopper, discharge chute can be rotated 180 degrees in the horizontal direction to accommodate different unloading location.
进、出料装置：由进料斗、排料槽可在水平方向旋转180度，以适应不同的卸料位置。
5·The utility model relates to a feed hopper in machining device. It is a self-feeding hopper device for small axial elements with different shape at two ends.
本实用新型涉及机械加工设备中的送料料斗，具体是一种二端形状不同的小轴类零件自动送料料斗装置。
6·The use of commonly used power-driven pulley, the principal organs of an organism, moving teeth set teeth set disk, Central screen, feed hopper and other parts, and fuel used to crush grain.
动力采用常用的皮带轮驱动，主要机构有机体、动齿盘、定齿盘、环筛、喂料斗等部分，用于谷物和油料的粉碎。
7·The hoppers connect to the pig barn, and the two hoppers also interlink, thus to ensure to share the feed in another hopper after one of them use up.
料斗和猪舍是相通的，两个料斗也是相通的，这样可保证一个料斗内的饲料用完后，使用另一个料斗内的饲料。
8·The slag is sent into the hopper by the belt conveyor or bucket elevator and sent into feed end through feeding pipe of feeder hopper.
矿渣由皮带输送机或斗式提升机送到料斗，然后经料斗的加料机通过加料管道进入加料端。
9·The design of single-chip microcomputer controlled by the automatic feeding system with hopper dryer feed supporting system.
本设计的由单片机控制的自动加料系统是与料斗式干燥机配套的加料系统。
10·Wind turbines under the hopper mouth form feed clearance.
风轮料斗下口形成进料间隙。