1·Flange width has changed by strengthening the compression flange and strengthening the tensile flange.
翼缘宽度变化按加强受压翼缘和加强受拉翼缘考虑。
2·In the analysis and design of steel-concrete composite beams, the concept of effective flange width is introduced to consider the impact of shear lag.
钢与混凝土组合梁的设计和分析中，通过引入有效翼缘宽度的概念考虑混凝土翼板中剪力滞后的影响。
3·In the paper, spear lag of beam plated construction and effective distribution width of flange plate are analysed through model test and research. It provides a reference in design.
本文通过大型试验的研究，分析梁板结构截面的剪力滞效应，及翼缘板的有效分布宽度，为设计提供参考。
4·The calculation and analysis showed that the main reason for the flange leakage resulted from the inadequate width of the gasket.
经过计算分析，法兰泄漏的主要原因是垫片宽度不够。
5·We put the concrete flange plate of the composite beam into the steel ones according to the elastic modulus ratio and keep the width of section unchanged, as a result, get a equivalent section.
将组合梁中混凝土翼缘板厚度按弹性模量之比换算，并保持宽度不变形成等效截面。
6·In this paper, for the thin walled linear strengthened steel box beam, the strength and valid width ratio of flange is investigated under the condition of elastoplastic limit state.
对由线应力性强化材料制造的薄壁钢箱梁在弯曲极限状态下的强度及有效宽比进行了分析。
7·At the theories part, this paper studies the flange plate effective width of composite truss.
在理论部分，研究了组合桁架的翼缘有效宽度。
8·The research shows that the elongation ratio between flange and webandthe width of flange had significant effects onthe metal flow.
研究结果表明，轧件的腿腰延伸比和腿宽对金属的流动趋势有明显的影响。