1·A long groove axially interpenetrates the guide sleeve.
导套上有一轴向贯通的长槽。
2·Design procedure and working principle of a automatic die carrier for assembling a bushing into guide sleeve are presented.
本文介绍了压装导向套内衬的自动模架的设计方法和工作原理。
3·The supporting length of the boring bar is prolonged and the hardness of the boring bar is greatly increased by the guide sleeve.
由于增加了导套，延长了镗杆的支撑长度，大大增强了镗杆的刚度。
4·The original profile of CAM in hydraulic press's distributor is not proper, its pressure Angle is excessive, so that the guide sleeve is broken.
某巨型水压机分配器的原有凸轮过渡曲线压力角过大，导套经常断裂。
5·The results showed that the dimensional stability of PA6 guide sleeve was greatly improved and the developed Nylon composite for the guide sleeve met the per-fom…
试验结果表明，尼龙6导向套产品的尺寸稳定性得到了大幅度的改善，研制的导向套用尼龙复合材料满足了产品的性能要求。
6·My guide has silver bells sewn to his sleeve.
我的向导在他的袖口上缝有几个银铃。
7·Guide frame, tension sleeve and twisting copper sheathing are lubricated once per shift.
导向架和箍圈、扭转铜套，以上各点每班注油一次。
8·Interior hub sleeve has the continuous wavy guide slot that circumference is extended, and outer hub sleeve has evenly distributed and axially extended slot on its inner cylinder face.
内毂套具有周向延伸的连续的波状导槽，而外毂套具有在其内圆柱面上均匀分布且轴向延伸的沟槽。
9·First of all, within the target-oriented in the plate and guide pin sets, and then slide the sleeve nut plate.
首先在垫板内对准导向销和导向套，然后滑入防松套筒板。
10·The hydrostatically guide C-axis sleeve is located at the front of the ram.
C 轴的静压导向套设置于滑枕的前部。