1·Sharpness oriented for aluminum machining. Good chip evacuation by 45 degrees helix angle.
重视铝合金加工的切削锋利度。45 度的螺旋角实现了良好的切屑排出性能。
2·Besides, the relationship between the tooth shape and the helix Angle, and the number of teeth are studied.
分析了端面齿廓形状与螺旋角及齿数的关系。
3·In the design of crossed-helical gears, the minimum sliding velocity is obtained when the helix Angle are equal.
在横渡螺线齿轮设计，当节面角是相等的时，极小值滑的速度得到。
4·The helix angle is the same on each gear , but one gear must have a right-hand helix and the other a left-hand helix.
螺旋角度是相同的在每个之上齿轮，但是一齿轮一定有一个用右手的螺旋和另一个一个左侧的螺旋。
5·Often described as a slender body of a white horse, the amount before a helix Angle (which is also a characteristic of the Licorne).
通常被形容为体型修长的白马，额前有一螺旋角(这也是独角兽的特征)。
6·The arithmetic for bbending be of DIGLST is Presented after the coefficients of helix angle and contact lines are analyzed by 3-D FEM.
分析双渐开线齿轮的螺旋角系数和接触线系数，提出了新型齿轮弯曲应力的计算公式。
7·Then, it is indicated that the gearing used presently, while its helix Angle and ratio are both big enough, is in danger of interference.
对于相啮齿轮端面齿廓相互关系的分析表明，目前使用的几种基准齿形，当螺旋角传动比都比较大时，存在齿形干涉的危险。
8·By using the profile modeling machining equipment of helix Angle, a new method about grinding rake face of gear cutter hob on tool grinder is presented.
提出一种用螺旋角仿形加工装置在工具磨床上刃磨齿轮滚刀前刀面的方法。
9·According to the volume oil formula of the straight gear pump, the volume oil formula of the helical gear pump is got and the helix Angle no trapping is found.
利用直齿齿轮泵的困油容积变化公式，求出了斜齿齿轮泵的困油容积变化公式，得到了斜齿齿轮泵不发生困油的螺旋角。
10·If helix Angle is equal to or slightly smaller than the Angle which makes two meshing boundary lines coincide with each other, preferable meshing performance is obtained.
采用使两条啮合界限线重合的螺旋角度，或略小于此值，均可获得较好的啮合质量。