hot rolled英文翻译_含义_读音_hot rolled例句

词性释义

热轧：指的是将金属锭通过一对滚轮，透过滚动来为之赋形的过程。如果压延时，金属的温度超过其再结晶温度，那么这个过程被称为“热轧”。压延是金属加工中最常用的手段。

例句

全部
热轧的

The effort of rotary de-scaling on the surface quality of a pickled hot-rolled strip is shown in figure 9.

图9表明了旋转除锈器对于热轧板带表面质量的影响。

The surface blow hole defect in continuous casting slab and hot rolled plate can be eliminated by utilizing no argon blowing.

采用不吹氩气的生产工艺可以消除连铸坯和热轧板表面气孔缺陷。

Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.

经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。

In making the decision of the revocation of export taxes rebate, market related hot-rolled steel has such a modest recovery.

在作出取消出口退税的决定前，市场上相关的热轧等钢材品种已经出现了小幅的反弹。

Hot-rolled bar of GH4049 alloy is an important materials of turbine blades and mainly used for manufacturing turbine blades of aeroengine.

GH4049合金热轧棒材主要用于制造航空发动机的涡轮叶片，是重要的涡轮工作叶片的材料之一。

The bubbles on the surface have bad effect on the appearance quality and further resistance of rusting of hot rolled ribbed bar.

前言：热轧带肋钢筋表面氧化铁皮“起泡”现象，严重影响产品外观和防锈效果。

Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, with patterns in relief, of a thickness of less than 3 mm.

其它热轧之铁或非合金钢扁轧制品，非卷盘状，厚度小于3公厘，经轧压凸纹者。

In the process of rolling machining and exposure to air, the hot-rolled wire will inevitably be formed a thin oxide scales on the surface.

其在轧制过程中以及在之后的空冷过程中，表面会自然形成一层薄的氧化铁皮。

At last, the paper will choose one or two kind of hot-rolled oil which have the better performance to prepare for the debugging in future.

最后，结合模拟实验研究的结果，本文将从中筛选出一种或者两种性能较优的热轧油为今后的现场调试工作做好准备。

HRB500 bar is a new hot rolled ribbed bar with hi-strength and strong ductility, which has been used widely in foreign countries.

HRB500级钢筋是一种强度高、延性好的新型热轧带肋钢筋，在国外已得到广泛应用。

Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of less than 3 mm.

其它热轧不锈钢扁轧制品，非卷盘状，厚度小于3公厘者。

Finally, FEA was used to analyze the drawing performance of those high strength hot rolled sheet metals.

最后，本文对几种高强度热轧钢板的圆筒拉深过程进行有限元分析。

The significance is discussed of increasing output of thin and ultrathin hot rolled strip used to substitute part cold rolled strip.

分析了增产薄规格和特薄规格热带，用以代替部分冷轧带卷具有的重要意义，进而对其市场需求进行了预测。

H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm.

铁或非合金钢制H型，热轧、热抽或挤制后未进一步加工，高度小于80公厘者。

The cost of the benchmark hot rolled coil steel is likely to hit $725-$750 a tonne by the end of next quarter, up from $550 in January.

基准的热轧卷钢的成本可能在下个季度末达到每吨725至750美元，而1月份只有550美元。

Other flat-rolled products of stainless steel, hot-rolled, not annealed and pickled, not in coils, of a thickness exceeding 10 mm.

其它热轧不锈钢扁轧制品，未经热轧退火酸洗，非卷盘状，厚度超过10公厘者。

U, I or H sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of less than 80mm.

槽钢、工字钢及H型钢，除热轧、热拉拔或热挤压外未经进一步加工，截面高度低于80毫米。

Therefore, the hot-rolled sheet annealing temperature should be as low as possible with the precondition of fully recrystallization.

所以，在保证热轧板发生完全再结晶的前提下，退火温度应尽量低。

Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness of 3 mm or more but less than 4. 75 mm.

其它热轧不锈钢扁轧制品，非卷盘状，厚度3公厘及以上，但小于4.75公厘者。

Fabricate frames, concealed stiffeners, reinforcement, edge channels, louvers and mouldings from either cold-rolled or hot-rolled steel.

制造门框，内加强筋，加强板，边槽，百叶窗和模件，可选用冷轧或者热轧钢板。

Hot rolled steel plates are important raw materials for weighty equipment manufacturing trades like for producing electric machineries.

热轧钢板是电力、机械等重大装备行业的基本原材料，如何提高其生产率降低损耗是设备制造行业要研究的问题。

Other flat-rolled products of stainless steel, hot-rolled, not in coils, of a thickness exceeding 10 mm.

其它热轧不锈钢扁轧制品，非卷盘状，厚度超过10公厘者。

Therefore, the choice of hot-rolled oil in the rolling process, as well as the changes is very import to the quality of hot-rolled strip.

因此，热轧油的选择以及对其在轧制过程中变化情况的研究对于提高热轧板带质量非常重要。

The overseas current production situation, development and the characteristics of hot rolled galvanized sheet are introduced.

介绍了国外热轧板热镀锌生产的现状和发展，以及热轧板镀锌生产的特点；

Bars and rods of alloy tool steel, not further worked than hot-rolled, hot-drawn, or extruded, of a diameter 100 mm or more.

合金工具钢条及杆，热轧、热抽或挤制后未进一步加工，直径100公厘及以上者。

'Steel buyers in the United States are bearish on the price outlook for hot-rolled, ' he says.

马库斯说，美国的钢铁买家看跌热轧钢的价格前景。

The application on a certain hot-rolled steel production line has demonstrated its effectiveness.

在某钢铁企业热轧生产线上实际应用中，取得了良好的应用效果。

T section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more.

铁或非合金钢制T型，热轧、热抽或挤制后未进一步加工，高度80公厘及以上者。

As major facilities of the hot rolled pipe production line located in the pipe rolling division of Tianjin Steel Tube Corp.

脱管机和定径机是天津钢管公司轧管厂热轧管生产线上的主要设备。

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.

具有规定的高温特性的压力容器用热轧可焊接钢棒

1·SEM and XRD results show that the composite that is hot rolled after vacuum forming, has relatively high density and can avoid being oxidized effectively.

结果表明，采用真空热压后热轧工艺制备的碳纳米管铜基复合材料的致密度较高且能有效地防止被氧化。

2·This paper describes the experimental results of the strength and stamping forming property of the hot rolled titanium steel plates, and presents their application in automotive production.

叙述了热轧钛钢板的强度和冲压成形性能的试验结果，介绍了钛钢板在汽车生产中的应用。

3·Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.

经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。

4·The scale defect is an important influence factor on surface quality of hot rolled strip.

氧化铁皮缺陷是影响热轧带钢表面质量的重要因素之一。

5·This paper introduces the contrast test of wear resistance of hot rolled low - carbon high strength bainite steel plate to ordinary steel plate on QLK800.32 bucket wheel reclaimer.

本文介绍了热轧低碳贝氏体高强钢板在qlk800.32型斗轮取料机上与普碳钢板进行耐磨性对比工业试验的情况。

热轧的