1·The fatigue life was linear to the logarithmic maximum stress.
疲劳寿命与最大应力近似呈对数线性关系。
2·The pipelines maximum stress turns greater when grouting pressure turns larger.
而随注浆压力增大，管线最大应力增大。
3·The maximum stress, strain at rupture, and Young modulus were obtained for each group.
获得每组标本的最大断裂应力、应变和杨氏模量。
4·The results showed that the maximum stress was located in the ground circle of the radome.
结果表明受风载荷的雷达罩的最大应力发生在截球底座的边界上。
5·However, this method can be very useful for a simple identification of maximum stress areas.
不过，这个方法可以非常有用的一个简单的识别的最大应力区。
6·Results Under every load, the maximum stress of femoral neck concentrated on the region above lesser trochanter.
结果在各种载荷下，股骨颈和股骨干各有一个应力集中部位。
7·The maximum stress occurs on the surface of the mandril and small stress occurs on the other part of the mandril.
芯模的最大应力出现在芯模的浅表层，在周向表面上呈点状分布，而芯模其他部位承受的应力并不是很大。
8·The results show that the maximum stress usually appears near the position when the tooth bears most of the load.
分析结果表明，齿根应力最大值一般出现在轮齿承受最大载荷的时刻附近。
9·Results show that the position where the maximum stress happens in FEA and the actual rupture position are the same.
计算结果显示，结构中应力响应最大值发生在筛箱短横梁处，与结构实际断裂位置一致。
10·The inner maximum resistance force and the maximum stress of the specimen decreases as the deformation temperature increasing.
在形变速率相同的条件下，随变形温度的升高，试样内部最大形变抗力及最大应力呈下降趋势。