1·Light sent into the oil layer was confined there, bouncing between the metal and air boundaries. The beam spread out ever more quickly, generating a trumpet-shaped glow (see image).
当把光传入油层后，就被约束在那里，光线在金属和空气的边界之间不断反弹，于是产生了喇叭状的辉光(见图片)。
2·A web of security cameras, metal detectors, beam sensors and bullet-proof screens will reinforce security in the three-storey, 3, 000 square-metre building.
在这座三层楼高、3000多平米的建筑中，监视系统、金属探测器、光束传感器和防弹屏构成了一个网络，加强安全保卫。
3·The beam also superheats metal objects like COINS, earrings, or spectacle frames, which can then burn skin.
光束能导致硬币、耳环、眼镜架这样的金属物体过热而烧伤皮肤。
4·Inductors were defined by electron-beam lithography and formed by depositing micron-thick aluminium metal onto the wafers.
用电子束刻蚀法在晶片上镀上纳米级铝层形成了电感器。
5·Laser forming is a flexible forming process that forms sheet metal by means of stresses induced by the laser beam.
激光成形技术是以激光为热源加热金属板料，依靠内应力使板料弯曲成形。
6·TITAN ion source is a new ion source which can produce strong metal and gas ion beam. Use.
TITAN离子源是一种新的能够同时产生强金属和气体离子束流的离子源。
7·The wire beam electrode method could be developed to study the fast electrodepositing behavior of metal.
探讨了不同材质的丝束电极和不同镀液对金属镍的快速电沉积行为的影响。
8·In addition, the project of controlling temperature of metal panel was raised with the study of effect mechanism between laser beam and metals.
另外，本文还结合激光与金属的作用机制，提出了金属平板温度的控制方案。
9·Last, a technique known as anisotropic ion beam milling (IBM) is used to etch through the mask to make an array of holes, creating the nanoporous metal.
最后，采用各项异性的离子束(IBM)加工技术可以通过掩膜来蚀刻孔阵，以制成纳米多孔金属材料。
10·The surface characteristics of evaporated rare-earth metal la thin film were studied by ex-situ and in-situ AES and molecular beam technique.
用俄歇谱及分子束技术就地与非就地研究了蒸发稀土金属镧薄膜的表面特性。