1·The maximum value, i. e. at the blast wave (or shock) front, is called the "peak overpressure."
位于冲击波波阵面上的最大超压值称为“最高超压力。”
2·Flame front closely follows Shockwaves at the same speed, and location of peak overpressure is coincident with flame front.
火焰面紧跟在激波前缘的后面，二者同速传播，超压峰值的位置与火焰面重合。
3·The damage of shock wave mainly depends on peak overpressure and scaled cube root distance is the most common method to estimate the shock wave overpressure.
冲击波的破坏伤害作用主要取决于峰值超压的大小，立方根比例定律是定量估算冲击波超压最常用的方法。
4·The results for the blast wave peak overpressure in the far-field predictions, as well as effects on the target's damage assessment and have a certain reference value.
计算结果对于冲击波峰值超压在远场的预测以及对目标的毁伤效果评估及有一定的参考意义。
5·The dynamic sensitivity calibration technique of a worksite measurement system has been employed to measure the peak overpressure of the FAE and TNT blast field with equiprecision measurement.
利用现场测试系统动态灵敏度标定技术，分别等精度测试了FAE和TNT爆炸场峰值超压。
6·Although the peak value of return shock is relatively low, the effect time is long and sometimes the scope excesses the maximal overpressure of some deflagration condition.
尽管二次超压的峰值相对较小，但作用时间长，且有些二次超压过程中的超压上升幅度甚至超过了某些爆炸环境下的最大超压值。