1·Most mechanical transmissions function as rotary speed changers.
大多数机械传动器的功能都作为转速变速器。
2·The rotary speed has no effect on the working load on cutting teeth.
转速对切削齿上的载荷分布基本无影响。
3·Critical rotary speed of the revamped driving shaft is also measured and analyzed.
并对改进后传动轴的临界转速进行了测定分析。
4·In a BLDCM, Hall position sensors (HPS) are usually used to detect the rotor's position and rotary speed.
在永磁无刷直流电机中，霍尔位置传感器经常用来测量电机的转子位置和转速。
5·The rotary speed control circuit adjusts the rotary speed of the fan according to the output electrical signal.
所述转速控制电路根据所述输出电信号调整风扇的转速。
6·It is necessary to test the performance of the hydraulic lock at the highest rotary speed of the rotary cylinder.
常用的试验装置无法在高速旋转的工况下进行液压锁的保压试验。
7·The results show that longitudinal vibration of drill string is relative to rotary speed and weight on bit (WOB).
实验结果表明，钻柱的纵向振动主要与转速和钻压有关。
8·The influence of interaxial break Angle and rotary speed on the torque is investigated and analyzed quantitatively.
研究了轴间角和转速对万向联轴器转矩的影响，并对影响程度做了定量分析。
9·The main factors that influence repair effect of nanometer zinc powder are rotary speed, consistency, time and load.
影响纳米锌粉自修复性能的主要因素是转速、浓度、时间和负荷。
10·The expanding sleeve film clutch of the utility model has a high driving preciseness, fast rotary speed and long using life.
本实用新型胀套膜片联轴器传 动精度高，转速快，使用寿命长。
1·A finite element method is presented to determine the steady state elastic responses of planar mechanisms with distributed mass, operating at a prescribed input rotary speed.
本文给出了一种求解具有均布质量、恒定输入转速的弹性平面连杆机构稳态响应的有限无法。
2·This paper has introduced a set of test device to examine the loads on teeth of the bit at different rotary speed and under high bit-weight.
本文介绍了一套测试装置，用以测试钻头在大钻压下任意转速的牙齿受力。
3·The influence of interaxial break Angle and rotary speed on the torque is investigated and analyzed quantitatively.
研究了轴间角和转速对万向联轴器转矩的影响，并对影响程度做了定量分析。
4·The factors affecting the use of mechanical seals, including temperature, pressure, rotary speed and characteristic of the sealed medium, are analyzed.
分析了影响机械密封使用的几个因素，包括温度、压力、转速以及被密封介质的特点。
5·The input electric current, voltage, rotary speed, output flux and output pressure of the pump were tested. The regression relation of these parameters was deduced.
测定泵的输入电流、电压、转速、输出流量、输出压力、泵效率等参数，通过回归推断各参数的相关特性。