1·Environmental clean: using screw gear transmission, discard the traditional hydraulic design, working environment, environmental clean.
洁净环保：采用丝杆齿轮传动，抛弃传统液压设计，工作环境洁净环保。
2·A screw gear type differential mechanism includes a differential carrier, an operculum, a main reducing gear driven gear, left and right half axis gears, etc.
本螺旋齿轮式差速器，包括有差速器壳、壳盖，主减速器从动齿轮，左右各一个半轴齿轮等。
3·Remove one socket pin head screw, three socket head bolts and gear operator cover.
拆卸一个灯头钉头螺丝，三个套筒头螺栓和齿轮执行机构盖。
4·Driven screw is driven by synchronous gear by the active screw.
从动螺杆是通过同步齿轮由主动螺杆带动的。
5·"New" gear, screw - using high quality materials, after high-frequency heat treatment, increase the service life of the machine.
“新型”齿轮、螺杆——选用优质材料，经过高频热处理，增加机器使用寿命。
6·Retention gear pump, motor and foot screws, screw the force should be uniform, reliable connection.
紧固齿轮泵、电动机的地脚螺钉时，螺钉受力应均匀，连接可靠。
7·In addition, the adjustment of the synchronous gear makes the screw does not contact, at the same time the output torque of the half to driven screw.
此外，调整同步齿轮使得螺杆不接触，同时将输出扭矩的一半传给从动螺杆。
8·The analysis results provide the necessary bases which are benefited for the design and improvement of new screw pump synchronous gear.
计算分析结果为新型螺杆泵同步齿轮的设计和改进提供了必要的依据。
9·Remove one socket pin head screw (c), three socket head bolts (d) and gear operator cover (e).
拆卸一个灯头钉头螺丝(C)，三个套筒头螺栓(d)和齿轮执行机构盖(E)。
10·This equation is useful in determining the kinematic linkage between the lathe spindle and the lead screw and enables proper selection of the gear train between them.
这公式在决定车床心轴和丝杆之间的运动学关系时很有用，并且提供了正确挑选它们之间轮系的方法。