1·The sintering shrinkage increased with increasing sintering temperature.
烧结温度的升高提高了烧结收缩率。
2·The effect of sintering temperature on the anode porosity was investigated.
研究了烧结温度对阳极孔隙度的影响。
3·The effect of the sintering temperature on the degrease performance is obvious.
其中烧结温度对陶粒的性能影响较大。
4·The grain size of the sample increases with the rising of sintering temperature.
材料的晶粒随烧结温度的提高而长大；
5·Effect of sintering temperature and sintering holding time on green density was analyzed.
分析了烧结温度和烧结保温时间对压坯密度的影响。
6·The effect of the sintering temperature on the result of the graphite sealing was discussed.
本文讨论了焙烧温度对石墨密封结果的影响。
7·With the increasing of sintering temperature, the optimum comprehensive performances increase.
随烧结温度的升高，复合材料的力学性能增大；
8·The sintering parameter is determined by combing the sintering temperature and the maintaining time.
烧结参数的选取需综合考虑烧结温度和保温时间。
9·At the same sintering temperature, the degradation velocity sequence of SCPP was 13, 9, 19 in order.
在相同的煅烧温度下，掺锶聚磷酸钙的降解速率由高到低分别为聚合度为13,9,19的掺锶聚磷酸钙。
10·The variability of sintering temperature has neglectable effect on the magnetic loss of MnZn ferrite.
在一定温度范围内，烧结温度对样品的功耗影响不大；