1·The development of HG hydraulic slide way oil was introduced.
介绍HG液压导轨油的研制过程。
2·Friction resistance can be greatly reduced because no slide way is arranged.
而且其结构可以没有滑道大幅度的减少摩擦阻力。
3·Various dimension guiding piston ring , steering belt , slide way are soft belt and so on.
各种尺寸的导向活塞环、导向带、导轨软带等等。
4·The slide way inner pretends to have locking organization, the handpiece drawing can lock fixation equally on any location.
导轨内装有锁紧机构，绘图桌机头在任何位置上均能锁紧固定。
5·The surface of the slide way base plate is provided with a plurality of slide ways arranged on the lower surface of the tray clamp.
一托盘夹具，其设于该滑道基板的另一表面，用以夹固该托盘；
6·While measuring the acceleration of gravity on the air cushion slide way, we cant receive an ideal and satisfying result because of the air resistance.
在气垫导轨上测重力加速度时，受空气粘滞阻力的影响，测量结果并不理想。
7·The burnout and wear procedure of cross slide way of 4L-20/9-II coke-oven gas compressor was presented and the burnout and wear causes were seriously analyzed.
阐述了4L-20/9-Ⅱ型焦炉煤气压缩机十字头滑道频繁烧研的过程，并对烧研原因进行了认真分析。
8·SBT series slide way draught machine design is advanced, fabrication is excellent, accuracy is high, mass is easy to be ideal plotting of project planner machinery.
SBT系列导轨绘图桌设计先进，制造精良，精度高、质量好，是工程设计人员的理想绘图机械。
9·The handle can enter different shift-level blanks through different positions of the slide way, and a neutral position and each shift are provided with a locking device.
手柄可以从滑道的不同位置进入各排档空格，并在空档及各档位有锁定装置。
10·When the counterbalance position moves vertically, the bearing pin is penetrated through a corresponding round hole of the slide way to adjust the height of the platform.
当配重位置发生垂直移动时，通过把承重销轴穿入滑道上对应的圆孔中，实现平台的高度调整。
1·When the counterbalance position moves vertically, the bearing pin is penetrated through a corresponding round hole of the slide way to adjust the height of the platform.
当配重位置发生垂直移动时，通过把承重销轴穿入滑道上对应的圆孔中，实现平台的高度调整。
2·The burnout and wear procedure of cross slide way of 4L-20/9-II coke-oven gas compressor was presented and the burnout and wear causes were seriously analyzed.
阐述了4L-20/9-Ⅱ型焦炉煤气压缩机十字头滑道频繁烧研的过程，并对烧研原因进行了认真分析。