1·The findings indicated: Temperature increment, the polymerization speed increases, balanced conversion rate in 86%.
研究结果表明：温度升高，聚合速率增加，平衡转化率在86%（略）。
2·The strip temperature model calculates the temperature increment caused by roll deformation and the strip's cooling temperature after it is being rolled.
带钢温度模型用于计算轧制带钢时带钢温度增量(由轧辊的变形引起的带钢温度增量)和轧制后的带钢冷却温度。
3·Furthermore, the influence of the different heat source conditions on the temperature increment, stress, displacement and pore water pressure is discussed.
通过数值计算讨论不同的热源输入对地基温度增量场、应力场、位移场以及孔隙水压力的影响。
4·The calculation methods for the fluid temperature increment in the submersible electric pump and the temperature gradient along the well bore are also developed.
给出了电潜泵内流体温升及井筒中流体温度梯度的计算方法。
5·The bigger the coolant flow is, the more slowly the reactant temperature rises and the shorter the temperature balance time is and the smaller the temperature increment is.
结果表明，冷却介质流量越大，反应介质温度上升越缓慢，达到温度平衡所需时间越短，温度增量越小。
6·From the analysis of the test results, the method of determining temperature increment path, shining temperature flowing path, is presented and relative formulas are given.
本文在分析试验获得的不同恒定温度下砼应力—应变曲线的基础上，通过假定，提出了映射温度流动路径，给出了具体的计算公式，并进行了试验验证。
7·The fit clearance between spool and sleeve decreases because of the thermal expansion of the spool caused by temperature increment, so it is possible that spool is deadlocked in sleeve.
油温升高使阀心受热膨胀，阀套与阀心间的配合间隙减小， 阀心有可能被卡死在阀套里。
8·Dynamic damping ratio of frozen soil decreases with increment of frequency or decrement of temperature.
冻土的动阻尼比随频率的增加或温度的降低而减小。
9·When temperature is higher than the threshold, the main change of permeability and porosity was resulted from the increment of micro-fissure width.
高于阈值温度后，影响岩石渗透率和孔隙度变化的主要机理是早期产生的微裂纹宽度增加。
10·Thirdly, we apply the theory of increment method to analyze the stress field of basement in construction period under the action of temperature and shrinkage strain by finite program ANSYS.
再次，运用增量法的原理，用ANSYS分析地下室结构施工期间在温度、收缩变形作用下的应力场。