1·Volume Shrinkage;
体积收缩率；
2·With crystalline plastics this can be significant as volume shrinkage is high.
对于结晶塑料，这种压力是巨大的，因为它的体积收缩高。
3·Polymerization volume shrinkage of EEPE resin was lower than other dimethacrylate resin.
与其他甲基丙烯酸类树脂相比，EEPE树脂的聚合收缩率比较低。
4·The volume shrinkage of the sample was lowed from 7% to 0.8%, which apparently smoothen the film.
特别是树脂的固化体积收缩率显著降低，从7％下降到0.8％，明显改善了涂膜的平整性。
5·The results show that the volume shrinkage of MTC solidified body is far less than that of conventional cement.
结果表明，MTC固化体的体积收缩率远小于水泥石的体积收缩率。
6·The repetition cycledensity densification model is revised by introducing the volume shrinkage percentage of the composites.
引入体系体积收缩率参数，对单一先驱体转化纤维增强陶瓷基复合材料致密化模型进行了修正。
7·Compared to the matrix resin, this nano hybrid resin has shown reduction of volume shrinkage 38% and increase of tensile strength 31%.
该纳米复合树脂与基体树脂相比较，体积收缩率降低38%，拉伸强度提高31%。
8·The effect of active monomers, oligomers and couple agent on shear strength and volume shrinkage of UV-curing adhesive was investigated.
考察了活性单体、预聚体及偶联剂对紫外光固化胶粘剂的粘接强度、体积收缩的影响。
9·Because of the rapid curing rate and big volume shrinkage, UV-curable coiling coatings are generally of bad adhesion to metal substrate.
紫外光固化涂料由于固化速度快、体积收缩大，故通常存在与金属基材附着力差的问题。
10·By combining the theoretical analysis and test, the monitoring method of observation well, by which the volume shrinkage deformation of the cavity can be derived, is provided and verified.
结合理论分析和试验的方法，验证利用观察井监测腔体蠕变收缩体积这种方法的合理性。