1·The utility model relates to a horizontal reinforced bar welding die. The utility model is especially suitable for the connection of reinforced bars with large diameter in construction engineering.
本实用新型涉及到一种水平向钢筋焊接模具，尤其适用于建筑工程中的粗直径钢筋连接。
2·Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
3·Plywood die molding, welding fixture that surface of the circular arc, straightness error is small, the ironing quality good.
夹板模具成型，焊接工装保证，表面圆弧度、直线度误差小，熨烫质量好。
4·Die stress analysis results show that the deformation of the die core increases with welding chamber height. For the stress distribution, there exists a best welding chamber height.
模具变形分析结果表明，随着焊合室深度增加，模芯变形程度增大，对应力分布来说，存在一个最佳的焊合室深度。
5·The procedure of thermit welding for repair of the ingot die is presented in the paper.
介绍了铝热焊修复钢锭模的工艺过程。
6·The experiment shows that fusion welding reinforcement could proceed on the surface with crack of the die after crack arresting.
脉冲放电止裂后，可对带有裂纹的表面进行强化处理。
7·The defects reasons for color glass shell screen die welding are analyzed, and related solutions are introduced.
分析了彩色玻壳屏模具焊接缺陷原因，并介绍了相应的问题解决对策。
8·By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
9·Results showed that effect of using the hot spray-welding process to strengthening the hot-working die steel surface was good.
结果证明采用热喷焊工艺对热作模具钢表面进行强化的效果优良。
10·These alloys are used for welding and brazing filler materials and for sand and die castings.
这些合金用于定位焊接和铜焊的焊料，和用做打磨或模铸。