1·Rated lightning impulse withstand voltage: L175KV;
额定雷电冲击耐受电压L175KV;
2·The stator winding of power frequency withstand voltage test.
定子绕组做工频耐压测试。
3·The factors which influenced the surface flashover and the way to rise the withstand voltage are also been analyzed.
对影响表面闪络发生因素,提高表面闪络电压阈值方法进行了分析。
4·The maximal withstand voltage of single insulator for the middle string of single circuit tower is more than the side string.
对于单回线杆塔,中相串的单片绝缘子承受最大电压值比边相串高;
5·While the main detection machine includes: 6-figure table, leak voltage tester, leak current tester and withstand voltage tester .
主要检测设备:6 位半数字表、泄露电压测试仪、泄漏电流测试仪、 耐压测试仪等。
6·ZJC-50KV controlled by computer, through the man-machine dialogue mode, the voltage breakdown insulation, power frequency withstand voltage test.
50 KV采用计算机控制,通过人机对话方式,完成对绝缘介质的工频电压击穿,工频耐压试验。
7·The series tuning device fOr the power-frequency withstand voltage test is introduced. The characteristics of the device are analyzed. The conclusion is given.
介绍了变压器工频耐压试验的串联调谐装置,对其性能和特性进行了分析,给出了结论。
8·The content of study included the relation between the length of long string insulators and U 50% of the artificial pollution power frequency withstand voltage;
其研究内容包括绝缘子串长与50%人工污秽工频耐受电压关系;
9·The selection of shunt reactor parameters and the most withstand voltage calculation of neutral point small reactor are discussed for different compensation modes.
给出了各种补偿方式下并联电抗器参数选择方法和中性点小电抗的最大耐受电压计算方法。
10·In addition, the author has established a simulative testing circuit in lab, in order to verify if the system can control the withstand voltage test process or not.
另外,笔者还在实验室建立了模拟试验电路,目的是检验系统能否作到对耐压试验的自动控制。
1·Using computer control, man-machine dialogue mode, the completion of the power frequency voltage breakdown of insulation media, power frequency withstand voltage test.
采用计算机控制,过人机对话方式,完成对、绝缘介质的工频电压击穿,工频耐压试验。
2·The stator winding of power frequency withstand voltage test.
定子绕组做工频耐压测试。
3·For the establishment and execution of new state detection criterion, this paper introduces a withstand voltage test system which corresponds to the standard of IEC61010.
为了配合仪器设备电气安全性能检测新国标的制定和实施,设计了符合IEC61010标准的耐压测试系统。
4·The results show that withstand voltage characteristics of the ceramics is not only correlated with both effects of PTC, voltage-dependent resistivity, but also with glass phase in microstructure.
结果表明,该陶瓷耐压性能不仅与PTC效应,压阻效应有关,还与显微组织结构中存在的玻璃相有关。
5·BBT owns mature LED production lines, equipped with integrating sphere, aging racks, withstand voltage tester, laser marker, digital power meter, insulation resistance tester, etc.
BBT拥有成熟的LED生产线,配有积分球、老化架、耐压测试仪、激光标记、数字功率计、绝缘电阻测试仪,等。