1·Push the back onto the radiator flanges.
将插回到散热器法兰上。
2·Rubber faced or mechanical flanges are not recommended.
建议不要使用橡胶表面或机械法兰。
3·Close all blind flanges, inspection holes and manholes.
关闭所有盲法兰盖、并检查各个孔和人孔。
4·Lower the valve into position between the pipeline flanges.
将阀门放低，使其进入管道法兰之间的位置。
5·This may cause an inadequate seal between the valve and flanges.
这可能会导致阀门和法兰之间的密封出现问题。
6·The engine-feed system interface is at the turbopump inlet flanges .
发动机与供应系统的交界是在涡轮泵的进口法兰盘处。
7·When bolting to steel flanges, longer bolts or stud may be required.
如果是应用在钢法兰晌，可能需要更长的螺栓或双头螺栓。
8·Large diameter Steel Flanges. Series A. Conforms to related dimensions.
大通径钢法兰。系列a。符合相关尺寸标准。
9·Flanges are also the standard connection for industrial butterfly type valves.
对于工业蝶阀，法兰还是标准连接方式。
10·Technology: flange type of heating is heating pipe welding flanges from fixed.
工艺：法兰式加热管是由加热管与法兰焊接固定而成。
1·The ends have two flanges that allow you to easily depress the spring to install or remove.
两端有两个法兰盘，让您轻松地抑制弹簧安装或删除。
2·Shanxi Dingxiang Tengda Forging Co. , Ltd. is a professional manufacturer of forged flanges and parts.
大冶华威锻造有限公司是法兰盘、各种锻件、管件的专业生产企业。
3·Be made up with pillar, frame, mesh meshes, flanges, fixed bolts, anti-theft bolts, wrench etc.
由立柱，边框，网片网孔，法兰盘、固定螺栓、防盗螺栓、扳手等组成。
4·Recommended for use on aluminum conduit, bolts, bushings, fittings, flanges, nuts, pipes, plugs and screws.
推荐使用在铝管、螺栓、套管、配件、法兰盘、螺母、管线、塞子和螺丝。
5·Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications.
管路用钢法兰盘，锻制管接头，阀门和零件的通用要求规范。