weld line

焊接线：在焊接过程中形成的连接两个或多个金属部件的线状区域。

常用释义

词性释义

焊接线：在焊接过程中形成的连接两个或多个金属部件的线状区域。
例句
  • 全部
This results in a thinner wall section on one side, thus adding another weakness to that of the weld line.
使得塑件的一边厚度增加，同时另一边由于存在熔接线而被削弱。
The variation in properties gives rise to a regular pattern of light and dark areas visible only when the weld is broken in the weld line.
只有当焊缝在焊缝线处破裂时，才可以砍刀规则的明亮区和阴暗区相间分布而显出这种性能变化。
在所选择的工艺因素中，保压压力对注塑件熔接线拉伸强度影响最大。
这种方法可以较为准确的研究材料性质、厚度（强度）差等因素对拼焊板零件焊缝移动或回弹的影响。
And finally, they enhance the forming depth and reduce the weld line movement through the numerical simulation.
最终提高了拼焊板方盒件冲压成形深度并减小了焊缝移动。
For the points with the same distance to the weld line, the temperature in the back zone is slightly higher than that in the front zone.
对于与焊缝中心等距离的点，后方比前方达到的温度最高值要稍高。
概述了注塑件熔接痕的分类及特点；
Pinhole. A short unwelded area in the weld line extending through the entire pipe so that fluid will leak out through the area very slowly.
针孔。指焊缝线上位焊接的、贯穿管子整个壁厚的细孔，可导致流体从该孔缓慢漏出。
Previous resolutions on the formability of tailored-welded blanks are mostly stayed in linear-weld-line TWBs.
以往关于拼焊板成形性的研究大多停留于直线焊缝拼焊板。
SS calculated long each weld line defined by average normal vectors at a node btw two adjacent elements
在相邻单元处，结构应力方向计算采用法线向量平均值
大型注塑制品熔接痕分析及解决对策
注射成型填充模拟分析：气泡和熔接痕的形成
重油催化裂化装置再生器筒体及焊缝出现裂纹后的举措
末端承受高应力集中的非封闭焊缝？
The reasons of creating the weld line end cracks in union-melt welding and the preventing measures
埋弧自动焊焊缝终端裂纹的产生原因及预防措施
工艺参数对注塑件熔接痕性能的影响
充模过程熔接缝形成的数值模拟
"Continuous" Weld Line Definition for Curved Weld Lines
曲焊缝的“连续”焊缝定义
Poor sonic weld Nest mark Solvent mark Weld line Abrasion mark Fold mark Fold line
超声不良超声压花溶剂印超声纹擦花折痕折纹四.装配类
Traction continuity requirements at nodes along a weld line
在焊缝各节点处拉力连续

© 2024 月亮词典 - 让翻译变得如此简单