6mm

6毫米

常用释义

词性释义

6毫米
例句
  • 全部
As the lens is so thin (between 6mm and 11mm), it could be used to replace the backlight of an LCD TV.
因透镜十分薄(6到11毫米),它可取代LCD电视机的背光。
In the laboratory, a metal plate coated in 6mm of aerogel was left almost unscathed by a direct dynamite blast.
在实验室里,一块覆盖了6毫米厚气凝胶的金属板在经受了烈性炸药爆炸的考验后安然无恙。
包括十个6毫米金字塔尖峰和穗扳手。
Could you look for a supplier that could provide us with the following: ASTM A240 316 Plate - 6mm thick, laser cut into the correct shape.
你能寻找一个供应商,可以提供下列方式:美国ASTMA240316板-6毫米厚,激光切割形状。
It's about over 70cm long, 5-6mm thick, unknown weight, fake blade on the point.
长大约70多厘米,厚5-6毫米,具体重量未称,刀尖有假刃。
基本思路是用透明乙烯管(内径6mm)模拟“油井”。
可拆卸的前保险杠:耐6毫米钢板的冲击。
用6毫米厚的天然或人造柳条松松地编织而成,然后被油漆成适合你需要的颜色。
We need stones (over 6mm) where the sizes is at most 0. 20mm in variance.
我们需要的石头(超过6毫米)的大小在方差最0.20毫米。
Moreoften , ore is crushed to about 6mm and leached in large concrete thanks by percolation leaching .
大多数时候,矿石被压碎到大约6毫米,并用淋失渗滤的方法使其浸出到大混凝土罐中。
This means that you need to use double 0. 6mm sheet metal to form the wall.
这就意味着您需要用两根0.6毫米厚的金属片来构成这墙体。
The shaft is a brass rod (6mm diam. ) mounted with two needle bearing.
竖井是一个黄铜棒(6mm的diam)。装两个滚针轴承。
每个40.6毫米,.999罚款银币是认证,分级和宝石光辉非流通条件认证星系。
It is the most wide incision in the size of the measured, most of the plasma cutting machine, the width of the incision 0. 15 ~ 6 mm.
它是以切口最宽处的尺寸来计量的,大部分等离子切割机的切口宽度在0.15~6mm之间。
With a case thickness starting from 6 mm, these are also the slimmest watches from Mido.
厚度从6mm开始,美度表同样也有纤细超薄的手表。
The gyro ball is too low. The height of sinking test is below 6mm.
陀螺球太低,下沉实验高度小于6毫米。
这些研究人员的机器人,身高仅仅6公厘,利用磁浮力即可升空。
6mm thick nubuck leather upper.
6毫米厚磨砂皮革鞋面。
1一点六毫米酒吧插入横向到衣领。
银鹰感到惊讶的.999纯银,直径和措施40.6毫米在一个完整盎司。
or riser, must nor exceed 6mm.
一定也不超过6毫米。
Full length 62cm, blade length 47cm, the most thick 6mm, width 25mm, no crack. With sharkskin on the hoop of hilt.
通长62,刃长47,最厚6毫米,宽25毫米,无纵裂。刀柄前箍下有残存的蛟鱼皮。
We make 6mm, 8mm plastic chain, any color.
我们六毫米,8毫米的塑料链,任何颜色。
厚度等于或大于6mm扁钢制品的超声检验(反射法)
钢—厚度大于等于6mm的扁钢产品的超声波试验
Connectors for rack and panel applications, rectangular, contacts with 1 and 1, 6 mm diameter; common mounting features, survey of types
柜式插接件.矩形.接触针直径为1和1.6mm.一般安装特点.结构型式综合
Connectors for rack and panel applications; rectangular, contacts with 1 and 1, 6 mm diameter; solder termination, dimensions of typ A
柜式插接件.矩形.接触针直径为1和1.6mm.钎焊连接.结构型式A的尺寸
Connectors for rack and panel applications, rectangular, contacts with 1 and 1, 6 mm diameter; ratings, requirements, tests
柜式插接件.矩形.接触针直径为1和1.6mm.特性参数.要求.检验
WPM made entirely of thin pieces of wood of 6mm thickness or less
全部是有6毫米或者以下的木材制造的。
Erichsen test (Thickness: 0. 4mm to 1. 6mm, figure round up to 0. 1mm)
杯突测试(厚度:0.4公厘至1.6公厘,准确至0.1公厘3个试片平均数)