Gray cast iron英文翻译_含义_读音_Gray cast iron例句

Various kinds castings of ductile iron, gray cast iron and alloy cast iron (Main Product is all kinds of elevator fittings).

各种牌号的灰铸铁、球墨铸铁、合金铸铁件（主要产品有各类电梯配件等）

Gray cast iron. A cast iron alloyed with silicon in which the graphite exists in the form of flakes. A fractured surface appears gray.

灰铸铁：一种用硅合金化的铸铁，其石墨以片状存在。断面呈灰色。

Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method.

通过预先制备带有孔隙的硼铁合金预制块，用普通浇注的方法，获得以灰铸铁为基的铸造表面复合材料。

Moreover, possible prospects of study on the processability of the gray cast iron in cylinder body are overview ed.

最后对缸体用灰铸铁加工性能方面研究存在的问题予以简要概括。

Phase or microstructure analysis of steel, grain size, inclusion, gray cast iron and ductile iron, cemented carbide test etc.

钢的相或组织分析，晶粒度，夹杂物检验，灰铸铁和球墨铸铁检验（全套），硬质合金检验（全套）等。

Iron nickel , high strength and excellent ductility . Repair welding of important gray cast iron and nodular cast iron.

加工抵抗张强度的金属、非金属材料：灰铸铁、黄铜、皮革、硬橡胶等。

Suitable for tapping threads in gray cast iron, nodular graphite cast iron, brass, brass castings, etc.

适用于灰口铸铁、球状黑铅铸铁、黄铜、黄铜铸件等的攻牙加工。

The filling morphology of gray cast iron melt in lost foam casting was observed by rapid photography method.

采用高速摄影法，对灰铸铁件消失模铸造充型形态进行了初步研究。

An trial to use nodular iron as substitute for alloy gray cast iron to produce Q6108model piston rings was conducted.

进行了球墨铸铁代替合金灰铸铁生产Q6108活塞环的试验。

Repair welding of sand hole and gray cast iron machined surface subject to no load.

不受力的灰铸铁加工面及砂眼补联系我时请说明来自志趣网，谢谢！

A kind of method to evaluate and test the tension-compression fatigue strength of gray cast iron was introduced in this paper.

介绍了一种评价与测试灰铸铁铸件的拉压疲劳极限的方法。

For the HT200 gray cast iron, the wear was caused mainly by the brittle flake.

HT200灰铸铁以塑性变形而产生的脆化剥落为主要磨损机制。

Of all the cast materials, gray cast iron is the most widely used.

所有的铸造材料中最常用的要数灰口铸铁。

Hardening HT20-40 gray cast iron with CO2 laser, the structures characteristics and forming principle of hardened layer were studied.

采用CO2激光器对HT20-40灰铸铁进行了熔-凝硬化处理，重点探讨了其组织特徵及形成机理。

Sulphur Control of Gray Cast Iron Used For Hydraulic Casting Melted in the Cupola Furnace

冲天炉熔炼灰铸铁液压件含硫量的控制

Repair welding of casting defects with hole type on the surface of gearbox in gray cast iron

灰铸铁件变速箱体表面孔类铸造缺陷的补焊

Crack-resistant Performance Improvement of A Chilled Gray Cast Iron Camshaft

冷激灰铸铁凸轮轴抗断裂性能的提高

Rugged construction: Machine body made of gray cast iron

坚固的结构：机体使用灰口铁制造

Analysis and Elimination of Sand Burning on Hydraulic Pump Case of Gray Cast Iron

液压泵壳体铸铁件粘砂的原因分析和对策

Microstructures and Tribological Properties of In Situ TiC Particle-reinforced Gray Cast Iron Composites

原位TiC颗粒增强灰铸铁复合材料的组织及其摩擦磨损性能

A Study on the Volume Expansion and Contraction Characteristics of Gray Cast Iron in Solidification Process

灰铸铁在凝固过程中体积膨胀和收缩特性的研究

Patent of New Type and High Efficiency Inoculant for Gray Cast Iron and Spherical Graphite Cast Iron

新型高效灰铸铁和球铁用孕育剂专利

Study on the Section-sensitivity of a Gray Cast Iron and the Quality of Casting

改善灰铸铁断面敏感性及提高铸件品质的研究

Isobaric and Equi-flux Techniques of Large Orifice Discharge Theory for Vertical Parting Gray Cast Iron Pump Body

垂直分型灰铸铁轴流泵体大孔出流等压等流量工艺

Proportional Solidification Technique of Gray Cast Iron Diffusor

灰铸铁扩压器均衡凝固工艺

Application Compound Inoculants on Improvement the Processability of the Gray Cast Iron in Cylinder Body

复合孕育处理在提高缸体用灰铸铁加工性能方面的应用

Microstructure Analysis of Typical Gray Cast Iron Parts-Domestic Made Blank vs. Imported Blank

典型灰铸铁零件国产毛坯与进口毛坯微观组织分析

Study on Microstructure and Properties of Gray Cast Iron Cylinder Liner by Centrifugal Casting

离心铸造灰铁缸套组织和性能的研究

Development of Automobile Industries and Production Technology of Gray Cast Iron Cylinder-body for Automobile Engine

汽车工业发展与汽车发动机灰铸铁缸体生产技术

Study on Microstructure and Properties of Gray Cast Iron by Laser Surface Overlaying Welding

灰铸铁表面激光送丝堆焊组织和性能的研究

通常呈灰色