HEADSTOCK英文翻译_含义_读音_HEADSTOCK例句

This form of serial numbering is still used today on guitars where the number is impressed into the back of the headstock.

今天仍然数的序列这一种形式在数字进入主桥承的背面之内被有印象的吉他上被用。

The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.

车床的最大的零件称床身，车头和尾架被紧固在相反末端的床身。

The Thermal Properties of Spindle Assembly and Headstock is one of the main elements that influence machining precision.

机床主轴部件和主轴箱的热特性是影响机床精度的主要因素之一。

The point is that there is a Heat Constant when testing the heat of the headstock.

提出床头箱发热问题的新观点，在检测床头箱温度时，存在一个“发热常数”。

If I understand your problem correctly, the first thing you have to check is the tailstock alignment with the headstock.

假如我正确地理解你的问题的话，你必须检查的第一件事是主轴与尾座的基准。

The basic components of the most common lathe (engine lathe) are the bed, headstock, tailstock, and carriage.

最普遍的车床（普通车床）的基本组成部分包括：床身、主轴箱、尾架、拖板箱。

From the above two actions can be tested headstock stem movement is a reliable group of two.

从以上两个启闭动作可检验阀杆动作是否两伙可靠。

The basic components of the must common lathe are the bed, headstock, tailstock, and carriage.

基本组成部分，必须共同车床，是在床上，头，尾，和运输。

The gears of the headstock have been quenched with high frequency and elaborate milling , they have high precision and low noises.

床头箱内齿轮经高频淬火精磨而成，精度高、噪音低。

Since the wheel can move on two axes, there is no need to move the workpiece headstock along its guides.

因为砂轮能够沿两个轴向运动，所以，工件头架就没有必要运动。

The compound bearing installed between the headstock and bearing seat does need any lubrication. No wearing.

主轴和轴座间安装有自润滑轴承不用加油，没有磨损。

Along workpiece can be held between the headstock and carriage.

工件可以顺着主轴箱和托板的方向被固定。

HEADSTOCK: All gears are made with chromium molydenum steel and are hardened & ground to its accuracy.

主轴箱：所有齿轮都用铬钢制造，并已加硬保证其准确性。

A forced lubrication system lubricates all running gears and bearings within the headstock.

强制润滑系统可润滑所有正在运行的齿轮和床头的轴承。

A modern lathe usually has a quick-change gearbox located under the headstock and driven from the spindle through a train of gears.

现代车床一般在主轴箱下装备快速变换齿轮箱，通过一系列齿轮由主轴驱动。

Plate serial numbers have nothing to do with headstock serial numbers.

碟子序号与主桥承无关序列数字。

HEADSTOCK All drives lubricated in a single oil - bath , reduce maintenance and servicing .

所有驱动件均足油浴润滑运转，减少保养工作量及降低噪音。

The chucks, usually mounted on the headstock spindle, may have different sizes and constructions.

这个球，通常安装在床头的主轴，可能有不同的大小和建设方式。

The gear box contained in the headstock makes it possible to run the lathe at various speeds.

齿轮箱包含主轴箱使车床可以在各种速度运行。

the horizontal bed is the foundation member which supports the headstock , tailstock , and carriage.

卧式床身是基础构件，用来支承床头箱、尾座和拖板。

A short work may be turned without using the dead center, by simply chucking it properly at the spindle of the headstock.

一个短的工作在主轴箱主轴上通过适当简单的卡盘无需使用尾架中心也许就能被转动。

In a case where a guitar has both the true serial number will always be the headstock number.

在一个一支吉他有的情形中两者的真实序号将会总是主桥承数字。

By using advanced test equipment, the rules of operating manners of headstock gears and the hydrodynamic resistance torque are studied.

启闭机采用无级变速运行时，能较大幅度地降低动水阻力矩峰值；

1975 - Present, This old style serial number will either be on the neck plate or impressed into the back of the headstock.

1975-礼物，这旧的风格序号将会或碟子在脖子上是或进入主桥承的背面之内有印象。

One end of the workpiece is clamped in a chuck that is mounted on the spindle, the spindle rotates in the headstock.

工件的一端装夹在卡盘中，而卡盘则安装在主轴上，主轴在主轴箱里旋转。

According the size of components and the position of the hole that is processed to set the overall size of the headstock .

根据零件的大小及被加工孔的位置确定主轴箱的轮廓尺寸；

The headstock body is made of highly resistant thermally stabilized cast iron.

工件头架由经过热处理、具有高尺寸稳定性铸铁铸造。

Headstock is constantly oiled during operation.

启闭是在操作过程中不断加油。

Headstock can be moved along this arm and can be locked in any position.

主轴承可以沿着这旋臂移动而且可以被锁定在任何位置。

The main spindle and the gears are all mounted in the headstock.

主轴和齿轮都安装在主轴箱中。