tailstock英文翻译_含义_读音_tailstock例句

词性释义

n.

（车床的可调整或可滑动的）[机] 尾座

例句

全部
尾座
尾架

The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.

车床的最大的零件称床身，车头和尾架被紧固在相反末端的床身。

closer to go off work, should be cleaning and wipe test bed, and will the tailstock slip board box and withdrew to the right side, the bed.

临近下班，应清扫和擦试车床，并将尾座和溜板箱退到床身最右端。

Tailstock 's design also complies with a body modelling, coordinates front's fashionable outward appearance.

车尾的设计也遵从一体造型，配合车头的时尚外观。

If I understand your problem correctly, the first thing you have to check is the tailstock alignment with the headstock.

假如我正确地理解你的问题的话，你必须检查的第一件事是主轴与尾座的基准。

The basic components of the most common lathe (engine lathe) are the bed, headstock, tailstock, and carriage.

最普遍的车床（普通车床）的基本组成部分包括：床身、主轴箱、尾架、拖板箱。

Model SPK36B series NC rotary tailstock is one of the accessories for the NC rotary table.

系列数控回转尾座是数控回转工作台配套附件。

Mechanical shaft clamping via single taper mechanism, hydraulically actuated, including tailstock support.

通过液压系统操纵锥体，连同尾架支承将工件机械夹紧。

The basic components of the must common lathe are the bed, headstock, tailstock, and carriage.

基本组成部分，必须共同车床，是在床上，头，尾，和运输。

The others end of the workpiece is supported by the tailstock.

工件的另外一端由尾架支撑。

The middle group of castings are the parts for the Gingery dividing head and tailstock.

铸件中的小组是为金格里分度头和尾架的部分。

On the back of the tailstock is a third thumbscrew that locks the tailstock in place on the dovetailed ways.

在背部的尾架是第三thumbscrew认为，锁尾架在地方上配合的方式。

the horizontal bed is the foundation member which supports the headstock , tailstock , and carriage.

卧式床身是基础构件，用来支承床头箱、尾座和拖板。

Tailstock. The tailstock assembly consists basically of three parts, its lower base, an intermediate part, and the quill.

尾架总成基本包括三部分，底座、尾架体和套筒轴。

The four guide way design allows collision-free traverse movement of the tailstock .

四根导轨设计避免了尾座来回移动时的碰撞。

All of the principal units of the lathe amounted on a bed having ways along which the carriage and tailstock travel.

车床的主要部件都装在具有导轨的床身上，刀架与尾架可沿着该导轨滑动。

The easiest solution is to check the alignment of the tailstock and the . . .

最容易解决的是尾座的基准，而且最坏的问题是主轴。

The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.

对CY-61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。

The drilling tool is held in the tailstock, and the latter is then fed against the workpiece.

钻孔刀具安装在尾架上，然后对着工件进给。

The main component of the lathe: Spindle Box, Tool, Tailstock , feed me, and the crate slipped bed.

车床的主要组成部分有：主轴箱、刀架、尾座、进给箱、溜板箱和床身。

then the tailstock center is shifted a distance S in the direction normal to the lathe axis.

然后将尾架顶尖朝垂直于车床主轴方向移动一距离S。

The hole you see is the sprue hole for the tailstock, the pulley 's sprue is not visible in the picture.

这个洞你看到的是为尾座浇道洞，滑轮的浇口是不可见图片。

Tailstock job first and special air bearing design, Shift Light labor-saving.

工作头及尾座特殊空气轴承设计、移位轻便省力。

On the upper part of the bed there are special ways upon which the carriage and the tailstock slide.

在床身的上部有支架和尾架滑板的特别结构。

The headstock, the tailstock and the carriage are all on the lathe bed.

主轴箱、尾架和托板都是安装在床身上的。

Both chuck and tailstock are supplied with hydraulic or manual or peneumatic type.

这两个夹头，液压尾座供应或手动或peneumatic类型。

Taper bore of tailstock barrel No.

尾座套筒锥孔锥度。

Cone of tailstock quill bore MT No.

尾架套筒孔莫式锥度。

Taper of Hole in Tailstock No.

尾座套筒锥孔。

But the entire tailstock 's curve for the human the quite capable feeling, most important is returns very much coordinated.

而整个车尾的曲线给人比较干练的感觉，最重要的就是回归得很协调。

Design of Special Boring Machine for Finish-machining Tailstock Hole of the Lathe

车床尾座体孔精镗专机的设计

1·The fault of lathe tailstock effects the process quality of parts-one most important fact-and it is significant for maintain of machine and precision process to analyse them.

车床尾座故障是影响零件加工质量的重要因素之一，探讨分析其对零件加工质量影响对机床维护、精密加工等具有重要意义。

2·The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.

对CY - 61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。

3·The Super Exe stayed unchanged until 1935 when the centre height was increased to 3 1/2 " by the use of deeper headstock and tailstock castings;"

超级可执行维持不变，直到1935年时，该中心高度增加到3 1 / 2 “的使用更深入的启闭和尾座铸件；

4·The hole you see is the sprue hole for the tailstock, the pulley's sprue is not visible in the picture.

这个洞你看到的是为尾座浇道洞，滑轮的浇口是不可见图片。

5·Tailstock can be offset for turning tapers.

尾座可以抵消转弯的锥度。

1·The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.

车床的最大的零件称床身，车头和尾架被紧固在相反末端的床身。

2·The middle group of castings are the parts for the Gingery dividing head and tailstock.

铸件中的小组是为金格里分度头和尾架的部分。