bearing load英文翻译_含义_读音_bearing load例句

If transition at the shaft collar of a circular shaft adopting closed angle will bring biggish stress concentration as bearing load.

圆轴轴肩处若采用尖角过渡，承载时将引起较大的应力集中。

In crowd- pile foundation design, the general idea thinks all the load bearing by piles and not considering the interpile soil bearing load.

群桩基础设计通常不考虑极间土承担荷载，认为荷载全部由极承担。

The value and direction of the static steam force change a lot in different performance cases, which change bearing load directly.

不同工况下汽流力的大小和方向会发生改变，直接影响轴承载荷。

If the actual load is a combined radial and axial load , then an equivalent static bearing load must be calculated .

如实际负荷为径向和轴向复合负荷，则必须计算当量轴承静负荷。

In fact that hull girder deflection could greatly affect the bearing load, so the calculation must take it into consideration.

结果表明，船体变形对各轴承负荷的影响很大。

The maximum load that can occur on a bearing should be used in the calculation of the equivalent static bearing load .

除径向负荷外，此类轴承还能承受一定的轴向负荷（见“当量轴承动负荷”）。

but it will influence the magnitude and distribution of the main bearing load.

但也影响了主轴承载荷的大小和分布。

In all other cases it is first necessary to calculate the equivalent dynamic bearing load.

在所有其它情况下，首先需要计算当量轴承动负荷。

When constructs the load-bearing load cannot withstand cannot use the stone material ground.

如建筑承重荷载承受不起时就不能采用石材地面。

The resulting increased bearing load shortens bearing service life.

由此引起的轴承载荷的增加会缩短轴承的使用寿命。

The allowable pile bearing load is prestimated, And The outcome is in conformity to static pile test.

并以分析结果为依据，预估单桩承载力，结果与静力试桩结论相吻合。

Channel is bearing load of work surface, so the channel design and machining is particularly important.

沟道是轴承承受载荷的工作表面，所以沟道的设计与加工尤为重要。

In all other cases it is necessary to first calculate the equivalent dynamic bearing load.

在所有其他情况下，必须首先计算当量轴承动负荷。

At the same time, because of double screw compressor stress is bad, bearing load, its mechanical noise than single screw compressor.

同时，由于双螺杆压缩机受力不好，轴承受力大，其机械噪声也要比单螺杆压缩机要大。

Experiment Study on the Long-Term Stability of Bearing Load Cell in large turbine- generator sets

大型汽轮机轴承负荷传感器长期稳定性试验研究

The magnitude of the specific bearing load can be determined using

特定轴承负荷的大小可用下列公式确定

Relationship between Amplitude of Steam Turbine Generator and Bearing Load and Oil File Stiffness

汽轮机组振动幅值与轴承载荷及油膜刚度之间的关系

Influence on bearing load of ring-plate-typed pin-cycloidal epicyclic drive affect by machining error

加工误差对环板式针摆行星传动轴承载荷影响

Analysis of Bearing Load of an Inline Six Staggers Crankshaft

直列六拐曲轴轴承负荷的分析

Dynamic bearing loads - Equivalent dynamic bearing load

轴承动负荷-当量轴承动负荷

Analysis of Bearing Load and Settlement of the Reinforced Ground

对加筋地基承载力与沉降问题的认识

Application of Testing Method for Self-balance of Bearing Load Capacity of Pile in Cang Er-zong Bridge

桩承载力自平衡测试法在仓儿总大桥中的应用

Selection of bearing size - Equivalent dynamic bearing load

轴承尺寸的选择-轴承当量动负荷

Selecting bearing size using the static load carrying capacity - Equivalent static bearing load

根据静负荷承受能力来选择轴承的尺寸-等效轴承静负荷

A Calculation Of Bearing Load Sensitivity In Large Turbine-Generator Sets

大型汽轮发电机组负荷敏感度计算

Bearing load distribution and bearing clearance

轴承的游隙与载荷分布

Selection of bearing size - Equivalent static bearing load

轴承尺寸的选择-轴承当量静负荷

Utilization of module fired perforated bearing-load brick

模数烧结承重多孔砖的应用

Computation and Analysis of Bearing Load Capacity of Piles for High-pile Wharf

高桩码头基桩承载力的计算与分析

Calculation and Test of Bearing Load Capacity of Piles for Used High-pile Wharf

旧高桩码头基桩承载力的计算与测试

承重：指支撑楼上建筑物重量的承重结构。