reaming英文翻译_含义_读音_reaming例句

词性释义

n.

铰刀；纹孔

v.

钻孔；铰除（ream 的 ing 形式）

例句

全部
铰孔
铰刀

Removing the initially placed intramedullary nail and reaming the canal to insert a larger nail is called exchange nailing.

取出原先的髓内钉、扩髓并插入更粗的髓内钉，称之为更换髓内钉。

To reduce the technological transformation project costs, the legislature decided to roll mill site for reaming rack processing.

为了降低技改工程费用，决定在立辊轧机现场对机架进行扩孔加工。

The effects of water jet parameters and drill motion parameters on the soil reaming were investigated by an indoor test.

通过实验，研究了射流参数和钻杆运动参数对扩孔效果的影响。

Field tests indicate that the auger-type under-reaming tools can be used in construction of under-reamed piles in various formations.

试验表明，该种钻具可以满足在各类地层中的施工要求。

Remaining at the experience control stage, mandrel reaming process in retaining rings lacks the guidance in the formulation of parameters.

护环的芯棒扩孔工艺一直停留在经验控制阶段，对其中工艺参数的制定缺乏指导。

This operation is called "pre-reaming" .

该操作称“预扩孔”。

When compared to other reaming grades, the RX2000 has reportedly shown a 200 percent increase in tool life in forged steel applications.

跟其他的铰削牌号相比，RX2000在锻钢应用中发挥了极大的作用，使刀具寿命提高2倍。

Double spindle microcomputer- instructed oilpressure auto Bench lathe available for drilling and reaming in one processing.

双尾轴微电脑教导式油压全自动桌上车床，钻孔。攻牙可一次完成。

Intervention: Antegrade IM nail insertion with reaming of the femoral canal in either the supine or lateral position.

干预：采用仰卧位或侧卧位，股骨扩髓腔后顺行打入IM钉。

Reaming consists of removing a small amount of metal from a hole already drilled.

绞孔是在一个已钻好孔的基础上再切削少量的金属。

One technique is to use power reaming to penetrate the first cortex and then switch to hand reaming.

可以用电钻突破第一层皮质，然后换成手摇钻扩孔。

When reaming iron links, the reamer should not be askew.

削铁链时铰刀不能歪斜。

Thesis work carried out in the following areas: 1. Study the new slurry grouting pocket reaming soil nail technology.

论文主要开展以下几个方面的工作：1。研究了浆囊袋注浆扩孔土钉新技术。

Remove all slivers and burrs left cutting the tube, by reaming and filing, both inside and outside.

通过内外铰锉，将遗留在管道切割口的长条和毛刺清除掉。

Processing of work includes milling, boring, drilling, reaming, reaming, tapping and other multi-station multi-process processing.

加工工作包含铣、镗、钻、扩孔、铰孔、攻丝等多工位多工序的加工。

A new method which is used to promote the reaming quality with a new blade -like drilling bit is presented.

提出了一种用新刃形钻头提高扩孔加工质量的新方法，并分析了其中的机理。

The term jig should be used only for devices employed while drilling, reaming, or tapping holes.

钻模这个术语只用在服务于钻孔、铰孔或攻丝的装置上。

Companies are mainly Kong Qichui equipment, lathes, drill press, press, Mo Guangji, reaming machines, fixed assets 1000000.

现公司设备主要有空气锤、车床、钻床、压力机、磨光机、扩孔机，固定资产100万。

The results of under-reaming experiment for Q235B, DP590 and the test steel showed that the test steel has excellent flange elongation.

对Q235B、双相钢DP590和试轧钢板进行的扩孔试验结果表明，试轧钢板亦具有良好的延伸凸缘性能。

RESULTS: The surgery was limited to the vulva in 24% cases and in the reaming 76% of patients removed were also regional lymph nodes.

结果：手术只限于外阴在24%的案件和铰76%的患者也删除区域淋巴结。

Drilling (reaming, Reaming), shaving and grinding and other operations. 3.

钻孔（扩孔、铰孔）、刮削和研磨等多种操作。

The Methods for Reducing the Surface Roughness of Artificial Reaming

降低手工铰孔表面粗糙度值的方法

Application of the Point Reaming Technique to the Pull-out Anchor

定位扩孔技术在抗拔锚杆中的应用

Study of Reamer Optimize with Fuzzy Comprehensive Evaluation of Reaming

基于模糊综合评判的铰刀优化研究

Reaming Technology in the Long Open Hole of the Deep Wells in Tarim

塔里木深井长裸眼扩眼技术

Development of the mechanical PDC reaming tool while drilling used in oil drilling engineering

石油钻井用机械式PDC随钻扩眼工具的研制

Pathological Changes of Pulmonary Fat Embolism After Reaming and Intramedullary Fixation

扩髓及髓腔内固定引发肺脂肪栓塞病理变化的实验研究

Construction Technology for Grouting Pile with Hand Excavated Borehole and Reaming Borehole Bottom

人工挖孔与挖孔扩底灌注桩施工技术

Open Fractures of Tibia Treated by Limited Reaming with Intramedullary Interlocking Nail

有限扩髓交锁髓内钉治疗开放性胫骨骨折

Open Fractures of Tibia treated with Reaming Intramedullary Interlocking Nail

扩髓交锁髓内钉治疗开放性胫骨骨折

1·Because lathes also can do drilling and reaming, their versatility permits several operations to be done with a single setup of the workpiece.

由于车床还可以用来钻孔和铰孔，车床的多功能性可以使工件在一次安装中完成几种加工。

2·Reaming is one of the finish machining methods of hole.

铰孔是孔的精加工手法之一。

1·Tabular layout of article characteristics - part 86: drills, counter sinking and reaming tools with indexable inserts.

产品特性表。第86部分：钻，埋头钻和带分度镶齿的铰刀。

同义词

钻孔；铰除（ream的ing形式）

drilling boring