Outside Diameter英文翻译_含义_读音_Outside Diameter例句

A device that can be run into a wellbore with a smaller initial outside diameter that then expands externally to seal the wellbore.

一种可以下入井眼内的装置，刚下入井眼时外径较小，之后外部膨胀去密封井眼。

The down rod has a lower end (20) having a select outside diameter and a pair of mutually aligned holes (21) there through.

所述吊杆具有下端（20），其具有选定外径和穿过其的一对相互对准的孔（21）。

Spraying the service life of OT cemented carbide, and peg to hang and ontology from damage, not the outside diameter.

喷涂碳化钨瓦楞辊使用寿命增加一倍，且楞型和本体不受损坏，外径不减少。

To make sure that the bearings are correctly mounted, a "V" is marked across the outside diameter of the bearing pair (fig 8d).

为了确保轴承的正确安装，在配对轴承的外径上标有“V”（图8d）。

The inside diameter of all sleeves shall have appropriate clearance for outside diameter of line conductors and ground wires to be jointed.

所有套管的内截直径应有合适的间隙以便地线和导线能很好的连接。

Then the Outside Diameter of the blade is again measured very exactly, to determine Diameter Loss.

再次精确测量刀片的外径长度，以测定外径的降低。

Subsequently, the effective area was demarcated manually, and rolling bearing outside diameter character was distilled.

接着采用区域人工标定，进行滚动轴承外径的特征提取。

Conveyor track can be adjusted to apply to different outside diameter of the bottle.

输送轨道可以调节，以适用于不同外径的瓶子。

The solid sleeve is a slip fit coupling that fits the outside diameter of the tubing or fitting.

是一个滑动配合联轴器，连接管或管道的外直径。

the radius of the spindle platform is larger than the outside diameter of the bobbin with low center of gravity.

所述锭台的半径比松筒管的外径大，重心较低。

In the stitching process, to secure the linear speed of the outside diameter of rolls of paper.

在拼接历程洋，给包管两卷纸的外径线速率不合歧。

Self-aligning bearing outside diameter design have oil, lubricating oil hole effect is good.

调心轴承外径设计有油槽油孔，润滑效果好。

The allowable bending radius is not less 6 times( unscreened ) or 8 times(screened) of outside diameter of the cables.

敷设时电缆的允许弯曲半径不小于电缆外径的6倍（无屏蔽）或8倍（有屏蔽）。

In the first row of filter dimensions edit fields, you can specify the range of bearing outside diameter.

在筛选尺寸编辑栏位的第一列中，您可以指定轴承外径的范围。

When outside diameter larger, hob suit type; outside diameter is made with heart made hours will hob with handle a shaft type structure.

当外径较大时﹐滚刀制成套装式﹔外径较小时将滚刀制成与心轴一体的带柄式结构。

PLAIN WASHERS, REDUCED OUTSIDE DIAMETER.

平垫圈，外径渐减

Remark: Consult order for special outside diameter.

注：特殊外径需协议订货。

The well planner may specify a special drift that either has a longer length or a nonstandard outside diameter.

井眼设计人员可以制定一种特殊的套管整形器，可以是长度很长，也可以是非标准的外径。

D is the outside diameter in inches and dis the internal diameter in inches.

D是在英寸中外面直径和d是在英寸中内部直径。

Check the outside diameter of stabilizers.

检查扶正器的外径。

The parameters such as outside diameter and angle can be modified at any moment according to the working status displayed on the screen.

根据荧光屏上的工作情况，可以随时对产品的外径角度等进行修正。

Because the machine is a different model, payoff a difference of an outside diameter of the shaft, normally at 3, 6 or 12 inches.

由于机械型号差别，不闭卷机纸芯轴的外径出入比力众，凡是为3、6或12英寸。

The average outside diameter of the end pieces is 10 mm, but can vary between 8 and 14 mm in intervals of 2 mm.

所述末端装置的平均外缘直径为10毫米，但可以在相隔2毫米的间距在8毫米至14毫米之间变化。

Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing

外径控制的聚乙烯管和管路用电熔型聚乙烯配件规范

Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

限定外径的聚乙烯管用套节型聚乙烯配件

Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

外直径可控聚乙烯气体分布管及管道系统用塑料机械配件的规范

Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing

外径控制的聚乙烯管和管路用电熔型聚乙烯配件

Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

限定外径的聚乙烯管用套节型聚乙烯配件规范

Fulfilling Communications of Instrument Outside Diameter and Industrial Control Machine

实现外径仪与工控机的通信

The upper and lower limits of Normal tolerances for the bearing bore and outside diameter deviations;

轴承孔径和外径偏差的普通级公差的上下限；

外径：圆形物体最外层的边缘到中心的距离。