Brazed英文翻译_含义_读音_Brazed例句

The microstructure of the brazed joint was analyzed by means of a scanning electron microscope and an energy spectrum analyzer.

用扫描电镜和能谱分析仪对钎焊接头的显微组织进行了分析。

WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDING MACHINES. QUALIFICATION SPECIFICATIONS.

航天工业用焊接和钎焊组件.摩擦焊接机.合格规范

Welded and brazed assemblies for aerospace constructions. Electron beam welding machine. Qualification specifications.

航天结构用焊接和钎焊组装件.电子束焊接机.鉴定规程

Immediately after fluxing , the parts to be brazed should be assembled.

焊剂涂敷后，应该立即进行铜焊组装。

WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS. FRICTION WELDED ASSEMBLIES. QUALITY OF WELDED ASSEMBLIES.

航天工业构件用焊接和钎焊组件.摩擦焊接组件.焊接组件的质量

Welded and brazed assemblies for aerospace constructions. Resistance spot or seam welded assemblies. Quality of welded assemblies.

航空和航天制造用焊作和钎焊件.点焊和滚轮焊的电阻焊接件.焊件质量

A core drill bit consists of a steel tube with diamond segments brazed or laser welded on the drilling end.

核心钻头由一钢管或激光焊接金刚石钎环节就完钻。

Effects of fillers and brazing parameters on mechanical properties and microstructures of brazed joints were investigated.

研究了钎料类型及钎焊工艺对钎缝接头力学性能与微观结构的影响。

The FN connectors assure easy connection of air or gas lines with minimum pressure drop. All steel construction with gas tight brazed ends.

FN连接管确保了简单连接和最小压损。所有金属部分有锁紧头。

The four blades and guide blocks arranged according to the uniform division of a circle are brazed on the cutter body.

四块刀片和导向块按圆周待分排列钎焊于刀体上。

Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2 : brazed aluminium plate-fin heat exchangers.

石油、石化和天然气工业。板式热交换器。第2部分：铜焊铝板热交换器。

Aluminum welding requires a high degree of skill than CroMo, aluminum cannot be brazed.

铝焊接要求比CroMo技能程度高不能铝钎焊。

The changes of morphologies of brazed diamond grit in grinding were observed by using a digital video microscope system.

通过数字视频采集系统跟踪观察钎焊金刚石砂轮磨削过程中磨粒表面形貌变化。

Brazing Method: Assemble parts to be brazed.

银钎焊：需钎焊件组装。

This Osso Buco is first brazed over a slow fire for 2 hours to hold the juices inside.

这道炖小牛肘首先用文火慢炖两个小时以保持汁水仍在肉里。

Brazing - Non-destructive examination of brazed joints.

钎焊.钎焊接头的无损检验

Brazed armature connection to commutator .

转子和换向器直接连接。

The strength of soldered joint is less than a joint which is brazed, riveted or welded.

锡焊点的连接力要小于钎焊、铆接或焊接的连接点。

Brazing - Destructive tests of brazed joints.

钎焊.钎焊接点的无损试验

So, the detection of brazed joints is very important on the theoretical and practical significance.

因此，其焊缝的检测就具有非常重要的理论和实际意义。

Assemble parts to be brazed.

组装准备铜焊的部件。

It is the sole manufacturer of brazed heat exchangers in Taiwan, and has sales in more than 60 countries.

高力是台湾铜焊热交换机的唯一制造商，产品远销60多个国家。

the other hand, if high temperature when brazing, brazed joint is in prone to corrosion defects.

反之，钎焊温度过高，钎焊接头中容易出现溶蚀缺陷。

Calculation Method of Allowable External Pipe Load Applied to Brazed Aluminum Heat Exchanger Header and Its Application

板翅式换热器封头许用接管外载荷计算方法及应用

Preliminary Experimental Study of Monolayer Diamond Brazed Grinding Wheel

单层钎焊金刚石砂轮工艺研究初探

Aerospace - Brazed and high-temperature brazed metallic components - Technical specifications

航空和航天.硬焊及高温钎焊的金属结构构件.交货技术条件

Difficult Problems and Its Countermeasures of Brazed Bonded Monolayer Diamond Grinding Wheel

钎焊单层金刚石砂轮的现存问题及其对策

Evaluation study of the shearing intensity of brazed diamond grits

钎焊金刚石磨粒剪切强度评价研究

Microstructures characteristics and properties of solidified aluminum alloy brazed joint

铝合金钎焊凝固接头的组织特征和性能

Study of microstructure of vacuum brazed-joints of amorphous filler metals

非晶态合金钎料真空钎焊接头组织研究

钎焊的

adj.

v.