1·The adjustment, clamping and machining method in finish machining are summarized.
总结了精加工时的调整、装夹和加工方法。
2·Surface should be used as a fine datum to be processed first, because the precision of the positioning of the surface is more accurate, the smaller the clamping error is.
用作精基准的表面应先加工出来，因为定位其准的表面越精确，装夹误差就越小。
3·CNC Turning Lathe Machining with roughly the same, but the tool of choice, the choice of cutting parameters and workpiece clamping and other technology issues also have their own characteristics.
数控车削加工与普通车床加工大致相同，但刀具的选择、切削用量的选择以及工件的装夹等工艺问题也有各自的特点。
4·A clamping can be completed drilling, milling, chamfering, rigid tapping and other processing processes.
可一次装夹可以完成钻孔、铣削、倒角、刚性攻丝等加工工序。
5·The design of six station save time for clamping products and increase productivity.
六工位工作台的设计节省了装夹产品的时间，提高了生产效率。
1·First, the clamping voltage during the MOSFETs turning off is 800V, what is higher then of 600V.
第一，在场效应晶体管关断期间钳位电压是800伏特，高于600伏特。
2·Relay IC3 opens, protecting the amplifier and clamping diodes.
继电器IC 3断开，保护放大器和钳位二极管。
3·However, due to leakage effects flyback converter power switch off when the voltage spike caused by the need to be inhibited by clamping circuit.
然而，由于漏感影响，反激变换器功率开关管关断时将引起电压尖峰，必须用钳位电路加以抑制。
1·The feed speed and depth of blade carrier is adjustable, for electrical equipment, adopt PLC as the core, and the feeding, positioning, clamping and cutting (chamfering) can be finished in turns.
刀架的进给速度和深度可调，电器部分采用可编程序控制器“PLC”为核心，送料、定位、卡紧、切断(倒角)可依次完成。
2·Turn the coupling with the hand, should feel can easily turn the gear pump, no abnormal phenomenon such as clamping, then can be piping.
用手转动联轴器时，应感觉到齿轮泵能够轻松地转动，没有卡紧等异常现象出现，然后才可以配管。
1·In DC motor, the locality of axis of armature MMF was determined by the brush position, here the brush possessed a function of clamping.
直流电动机中电枢磁动势的轴线位置是由电刷位置决定的，电刷具有箝位的功能。
2·Advanced voltage clamping techniques are demonstrated, which can also limit the second voltage spike originating from the tail current cut off.
可以证明，采用先进的电压箝位技术能够限制因关断拖尾电流而引起的第二个电压尖峰。
3·In DC motor, the locality of axis of armature MMF was determined by the brush position, here the brush possessed a function of clamping.
直流电动机中的电刷能够指示直流励磁磁极的位置，又可以控制电枢电流的相位，直流电动机应是箝位电动机。