1·In 2005, a postdoctoral researcher in his laboratory developed a water annealing process, reconstituting the silks slowly in a humid environment.
2005年，他实验室的一位博士后研究员利用一种水退火过程在潮湿环境下对丝类进行了缓慢的重组。
2·Through various drawing methods and annealing steps, We produces different physical characteristics in wire of a given size.
通过各种绘图方法和退火步骤，我们产生不同的物理特性，在一个给定大小的丝。
3·The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.
采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。
4·According to phenomenon, combined with annealing principle to explain and solve operational some mistakes.
现根据现象，结合退火原理来解释、解决操作上的一些失误。
5·This process is known as full annealing because it wipes out all trace of previous structure, refines the crystalline structure, and softens the metal.
这过程被称为完全退火，因为它去除了以前组织结构的所有痕迹、细化晶粒并软化金属。
1·Relatively low ordering temperature for the multilayer is due to the extra driving force of ordering process caused by the vanishing of the multilayer interface at annealing.
多层膜化促进有序化在较低的温度下进行，这是由于热处理过程中多层膜界面的消失提供了有序化过程额外的驱动力。
2·Influences of the metallizing technologic conditions, Ni plating and subsequent annealing on the joint shear strength were investigated.
考察了金属化工艺、镀镍及镀后热处理对接头剪切强度和钎焊效果的影响。
3·It concludes that annealing processes may change the structure and phase formation of the alloy, and consequently effects the magnetic properties of the alloy.
发现不同的热处理工艺可以改变合金材料的结构及相组成，从而明显地影响该合金的磁性能。
4·Using spectroscopic ellipsometry, the influence of thermal annealing on optical properties of the plasma-deposited hydrogenated amorphous carbon films is investigated.
用椭圆偏振光谱法研究了热处理对射频辉光放电淀积的氢化非晶碳膜光学性质的影响。
5·The effect of annealing temperature on the structure and electrochromic properties were discussed. Furthermore, coloration mechanism was discussed.
分析了热处理温度对薄膜的结构和电致变色性质的影响，讨论了薄膜的致色机理。
1·Electrolytic Cleaning is required in case material rolled with high percentage of oil while reduction in mills goes for annealing in furnace.
电解的清洗被需要以防万一以高百分率的油卷的材料当在制造工厂的还原反应在炉中去拿核酸混合的时候。
2·The process of annealing of cold rolled coil is carried out to obtain the desired properties in the finished coils.
卷线圈的寒冷的核酸混合的加工被实行在完成的线圈中获得被需要的性质。