表面轮廓。表面轮廓（底材表面粗糙类型）应满足涂层厂家建议。
探测杆在压力作用下促使探针刺入涂层直至涂层的底部。
该组合件在轮胎中或上使用。该组合件包括具有主体和在至少电子装置主体上的粘合剂涂层的电子装置。
针对塑胶表面涂装对环境的要求，鑫用公司的涂装生产线是全封闭管理。
喷射混凝土单可能是唯一的涂料需要建立在一个大猩猩笼子岩石风景，只要大猩猩将它关闭。
涂料中胶粘剂的用量直接影响纸张的印刷表面强度、白度、不透明度、光泽度和吸收性。
本文对一种全热换热器干燥剂涂覆工艺及其对全热换热器性能的影响进行了试验研究和分析。
一块弹性膜将两层隔膜分开，使得心脏在跳动并产生位移时，依然能够和身体相连。
这其次就是看皮膜，第一，皮膜的颗粒要大。第二，皮膜的颜色成份中黄颜色越多越好。
新的涂层材料的表面上的键盘，成为认为，在其中对样板被抠出洞的钥匙。
所述方法包括将包含镁粉和粘合剂的涂料施涂到金属表面上。
购买的溶剂型木器涂料应在保质期限内使用，一般情况下保质期为一年。
纳米润滑添加剂表面改性的方法主要有：包覆改性和表面化学改性。
该涂料对水泥具有极强的渗透力和极好的附着力，硬度高，层间附着力好。
结果表明，陶瓷膜具有内部致密层和外部疏松层两层结构，膜层与铝基体为冶金结合。
识别内容多，便于安全安装使用，涂敷方便，涂后不易脱落，生产效率高。
要注意水性上光油的涂布量是不容易控制的，因此粘度的控制至关重要。
其次，结合电接触理论，设计了接触对的结构形式，确定了接触对的表面涂覆形式。
可用于包装和食品机械上与食品直接接触的零部件的表面涂层。
为防止集输管道内壁腐蚀并提高输送效率，常常使用内涂层。
四附着强：光固化工艺采用UV漆，漆面过厚，极脆，韧性不够，容易破裂并脱落；
具体的做法是，看钻戒有没有毛糙的地方，戴在手上没有棘手的感觉，表面的镀层要金光闪闪。
考察了该复合镀层微动磨损性能，并与基体微动磨损性能进行了比较。
模特不要摆在太阳直射的地方，经常照射的话，模特表面的油漆会变色。
流出物涂料中的组分在干燥过程中或贮存或最后安装过程中迁移过程。
1·Fluorescent lights use electricity to excite mercury vapor. This produces ultraviolet light that causes a phosphor coating inside the bulb to glow.
荧光灯用电激发水银蒸气。这会生成紫外线光而使得镀在灯管内壁上的磷涂层发光.
2·Moreover, the bionic material structures, which mimic the Plato bodies and Kapler-Poinsot bodies, were suggested to design the composite coating systems.
此外还讨论了仿柏拉图体与开普勒-波因索特体的复合材料涂层结构设计。
3·But this new coating could change all this.
但是，新的涂层可以改变这一切。
4·Research have shown that the layer of wax coating on the noodles is quite harmful to our body and we should not consume it too frequently.
研究表明，方便面上的那层蜡涂层对我们 的身体有非常大的毒害作用，我们不应该过于频繁食用它。
5·The coating would be built into the windows or other materials as part of the manufacturing process.
这种涂层也可以在制造过程中直接做到窗户或其他建筑材料上。
1·His jacket is rainproofed by applying a chemical coating on it.
他的夹克衫上涂了一层化学涂料，能防雨。
2·The plastic coating is easy to apply on any surface.
塑性涂料容易涂在任何表面上。
3·The building material of these stalls might have something to do with the paint coating that is required.
这些棚亭的建筑材料可能与要求粉刷的涂料有一定的关系。
4·Early electrical workers used it as a coating to insulate coils, and molded it into stand-alone insulators by pressing together layers of shellac-impreg-nated paper.
早期的电力工人将它用作涂料，隔离缠绕在一起的线圈，还将注满了紫胶的纸一层层地压紧制成单独的绝缘物。
5·The company claims that the coating cools traditional roofs by 50 to 80 percent in summer, and holds on to about 80 percent more warmth than a white roof in the winter.
公司声称这种涂料在夏天会比传统的屋顶凉爽50%到80%，而在冬天要比白色屋顶多容纳80%的热量。
1·In powder coating process, compressed air the energy release of the expansion can ascend and fluidization powder, the powder pump out in from hopper and through the hose transported to the gun.
在粉末涂装过程中，压缩空气膨胀所释放的能量可以提升和流化粉末、将粉末从料斗中抽吸出来并通过软管输送至喷枪。
2·Due to the compressed air pipe internal may produce pollution, so in the air into the powder coating system best filter processing after before.
由于在压缩空气管道内部可能产生污染，所以在空气进入粉末涂装系统之前最好经过过滤处理。
3·In not curing powder coating surface of workpiece solid pollutants is invisible, the film became very obvious once curing.
在未固化的粉末涂装工件表面固体污染物是看不见的，涂膜一旦固化则变得十分明显。
4·All these solid pollutants may jam tiny hole, air lines, equipment and valve, also caused the pollution of powder coating workpieces.
所有这些固体污染物都可能堵塞细小的孔、空气管路、设备和阀门，也造成粉末涂装工件的污染。
5·With compressed air temperature drop, the excess oil vapour condenses into liquid oil, to make the powder coating system problems.
随着压缩空气温度降低，多余的油蒸气将凝结成液体油，从而使粉末涂装系统出现问题。
1·Professor Lin told CNN: "the anti-reflective coating requires multi-layer coatings which are slightly more complex than the typical single-layer ones."
林教授告诉CNN说：“抗反射层要求涂布多层，这比典型的单层要复杂些。”
2·This is because the primer coating is too wide can lead to drying of the film too thin, which in turn weaken its main properties.
这是因为底漆涂布得太广也会导致干燥后的漆膜过薄，从而反过来削弱它的主要性能。
3·The controlled speed determines film thickness and overall coating efficiency, and its surface finish determines the texture of the coating.
速度的控制决定薄膜的厚度和整体涂布的效率，并且表面的光滑决定涂层的手感。
4·Double side anti-static gelatine coating substrate; Used for producing printing film and movie film, etc.
双面涂布防静电明胶底层；用于生产印刷胶片、电影胶片等。
5·One side anti-static gelatine coating substrate; Used for producing graphic arts film and inkjet film, etc.
单面涂布防静电明胶底层；用于生产印刷胶片、喷绘片等。
1·This technique is widely applied to granule core coating because due to high evaporation rate of fluidized bed, the granule could be coated when suspended in the air stream.
由于流化床设备有极高的蒸发效率，颗粒悬浮在气流中，进行包衣，使得这一技术能广泛地适用于粒芯包衣。
2·RESULTS Hydroxypropyl cellulose is extensively used in tablets, capsules, mucous membrane adhesion preparation, sustained or controlled release preparation, and film coating, etc.
结果羟丙基纤维素在片剂、 胶囊剂、黏膜黏附制剂、缓控释制剂等多种制剂以及薄膜包衣方面均有良好应用。
3·So far resistant cultivar and seed coating agent has long been considered as major way to overcome the diseases.
选育抗病品种和种衣剂包衣是目前防治土传病害的主要手段。
4·Results Film coating for granule could improve the stability of granule and lower the bad odor.
结果对颗粒进行薄膜包衣可提高颗粒剂的稳定性，降低不良气味。
5·OBJECTIVE the equipments, processes, excipients in common use and influence factors as well as applications in pharmaceutical fields of the dry coating technology are reviewed.
目的综述了干法包衣技术的特点、设备、常用辅料及影响因素，并对其在药剂学上的应用进行了简述。
1·If the DFT is reduced to less than specified, the area shall be abraded as described above and an additional layer of coating shall be applied until sufficient thickness is achieved.
如果干膜厚度缩减到低于指定时，该区域按照之前描述的进行研磨，并应再涂敷额外的一层保护层直到达到足够厚度。
2·The coating shall be applied so that the steel surface receives a minimum of 1.5mm 1500 m, 60mils over the bare steel.
应进行涂敷以便钢材表面达到裸钢以上最小1.5毫米(1500微米，60密耳)的厚度。
3·In this paper, both basic structure of lubricant coating device and its working principle are discussed and the deformation of some workpieces is analysed and calculated.
对轿车铝合金轮毂模具涂敷装置的基本结构及工作原理进行了探讨，并对杆件的变形予以分析与计算。
4·The influence of the second coating on the fiber Bragg Grating(FBG) temperature sensitivity is researched.
系统研究了二次涂敷封装方案对光纤光栅（FBG）温度特性的影响。
5·At present, the domestic production lines for concrete weight coating of submarine pipeline are basically imported.
目前，国内管道混凝土配重涂敷厂的生产装备基本为国外进口。
1·In mechanical products using electrolysis deposited on attachment good, but the performance and substrate material of different metal coating technology.
利用电解作用在机械制品上沉积出附着良好的、但性能和基体材料不同的金属覆层的技术。
2·Growth velocity of carbide coating is affected by factors such as the activity of carbon in matrix and treatment temperature.
碳化物覆层成长速度主要受基体中的碳活度、处理温度和时间等因素控制。
3·Heat treated layer, carbonized layer, hardened hard layers, superficial coating, steels, non-ferrous metal, micro and thin shaped components.
热处理、碳化、淬火硬化层，表面覆层，钢，有色金属，微小及薄形零件等。
4·The coating has little effect on mechanic properties of the BOPET film.
涂覆层对BOPET薄膜的机械性能影响不大。
5·No tear or break on the coating or dipping layer of P. E. coating film is allowed.
聚乙烯薄膜覆层或浸层不得出现撕裂或破损。
1·When the metal coating is punctured or scratched, the capsules in the damaged area burst and ooze restorative liquids, in the form of compounds called trivalent chromates.
当金属的覆盖层受到扎刺或划损时，受损区域的胶囊将会破裂并渗出具有恢复性的液体- - -三价铬钝化化合物。
2·The protective coating of buried steel pipelines plays a main role in anticorrosion.
外覆盖层在埋地钢质管道的防护中起着主要作用。
1·The high water-soluble cydiodine prepared by the method has the advantages of having fast coating speed, high water-soluble, good disinfect effect and stable quality.
利用本发明方法制备的高水溶 性西地碘具有包被速度快、水溶性高、消毒效果好以及质量稳定等优点。
2·The preparation method is more convenient than a coating process, and is more applicable to large-scale production.
本发明制备方法比包被工艺更加方便，更适合于大规模生产。