Push Rod

推杆:一种机械装置

常用释义

词性释义

推杆:一种机械装置,用于将推力传递到其他部件或机械系统中。
例句
  • 全部
and a position limiting device which corresponds to the support arm is arranged on a push rod of the fuel-cut cylinder.
所述停油气缸的推杆上设置有与所述支臂对应的限位装置。
A knockout assembly consists of a plate , a push rod , and a retaining collar .
顶出的安装部件包括一个金属板,推杆,定位圈。
Attached to the plate , usually by rivets , is a heavy push rod which slides in a hole in the shank of the die set.
通常,利用铆钉将模柄孔中滑动的推杆安装在金属板上。
The utility model provides a cavitary mucosal doser which comprises a supporting tube, a medicine loading chamber and a push rod.
本实用新型提供一种腔道给药器,包括支撑管,装药室,以及推杆;
它是由一个蓄能机构、阻尼机构、推杆机构组成的装置。
该传感器是非常稳健,身体和推杆是由不锈钢制成。
Near the upper limit of the ram stroke, a knockout bar in the press will contact the push rod and eject the blank.
接近限制冲力最高点时,压力推动下的脱模杆会与推杆接触并将毛坯顶出。
The saw bits are arranged on the shaft ends of the main shaft, and the hydraulic push rod i slinked with the main shaft.
锯片安装在主轴轴端,所述的液压推杆与主轴联结。
推杆和中间轴必须每年用轴承油润滑。
通过推杆的旋转使进液腔的体积增加,聚合物溶液通过自身压力进入。
这根推杆拧紧在一个微型的活塞头上。
The push rod, as it is lifted, causes the end of the rocker arm to move up.
当推杆升起时,摇臂的端部向上移动。
换筒方式:单独机电带动链条推杆,推出满筒同时喂入空筒。
Clinically, the baffle tongue is firstly positioned in the lengthways long groove on the push rod.
临床时,挡舌首先处在推杆上的纵向长凹槽中。
限位柱17与动模型芯固定板背面接触后,推杆固定板停止运动。
当手柄抬高到垂直位置,它就将可拆卸“压杆”压下。
The cam follower rides against a push rod, which pushes against a rocker arm.
凸轮挺杆推动控制摇臂的推杆。
Both the push rod and push rod spring are installed on the lid liner, and screwed.
推杆与推杆弹簧安装在锅盖内衬上,并用螺钉连接固定。
The bread supporting rod is arranged above the bread push rod.
面包支撑杆设置在面包推杆上方。
生产机油泵、气门推杆、气门导管等系列
推杆和滚轮导架都要拆下来。
推进方位连杆驱动器的硬件设置。
The utility model discloses a new electric power hydraulic driver unit with single push rod, which is used as a driving device of arrester.
一种作为制动器驱动装置的新型单推杆电力液压推动器。
A first push rod is rotationally connected with the first front wheel bracket.
第一前轮支架与第一推杆转动连接
该传感器具有强大的不锈钢机身和推杆,车身安装选项包括M5的螺纹,M5的眼睛或身体棒夹具。
A joint lever is arranged on the joint, and can press the push rod when pulled by a guy cable to open the valve core.
接头上有接头杠杆,在拉索的拉动下能够压动顶杆,打开阀芯。
the front end of the push rod is arranged in a clearance between two side walls of the connection seat;
有一个推杆,推杆的前端处于连接座的两侧壁之间的间隙中;
针对塑件的推出,特别设计了一种带推件镶块的推杆,简单实用还可方便多次更换;
四顶推杆使用该设备的稳定性,可*,定位精度高,可大大减少并行土坯错误;
双级活塞推料离心机推杆断裂分析及改进方案
同义词
制动缸推杆;推棒;顶杆