coning
英音[ ˈkəʊnɪŋ ] 美音[ ˈkoʊnɪŋ ]

锥进

常用释义

词性释义

n.

锥进

v.

使成锥形;使成斜角(cone 的现在分词)
例句
  • 全部
  • 锥进
Police coning in all directions, he knew that he was trapped and there was no escape this time.
警察四面涌来,(所以)他意识到自己被困住了,而这一次可是无路可逃了。
To people's surprise, he made much better achievements after coning back with his injury cured.
让国人惊喜的是,在伤愈复出之后,他又创造出了好的成绩。
The definition of conicity of a cone is presented. The least square evaluation method for conicity given coning is introduced.
给出了圆锥面锥形度的定义,介绍了给定锥度的锥形度最小二乘评定计算方法。
In the development process, as a result of the bottom water's coning, the oil well soon be flooded, development effect variation.
在开发过程中,由于底水锥进,油井很快水淹,开发效果变差。
以角速率信号作为算法输入时,采用以往常用的圆锥补偿算法,算法误差明显增大。
At last compensate precision of two-intervals coning compensate algorithm was researched in each method.
并对圆锥补偿算法在每种方法下的补偿效果进行了研究。
经典圆锥算法的精度具有随着圆锥运动频率降低而提高的单调特性。
The simulation results show that coning error and sculling error can be compensated satisfactorily in the algorithms. 3.
仿真结果表明:捷联惯导算法能实现对姿态圆锥误差和速度划船误差的补偿。
With regard to gas wells have bottom aquifer, the critical production to avoid bottom water coning was calculated.
如气井下方存在底水,通过计算得到了避免底水锥进的临界产量。
在圆锥运动下产生的圆锥误差是捷联惯导系统的重要误差源。
The use of pump around reflux heat is also be discussed, and some coning problems and its solving measures are put forward.
讨论了中断回流取热问题,并提出面临的新问题及对策。
我告诉她你要来时,她表示惊讶。
针对薄层底水油藏的底水锥进提出了不射孔建立底水隔板的方法。
A common technique of controlling water coning in oil reservoir with bottom water is to build up barrier by perforating and setting packer.
常规底水油藏采用射孔建立底水隔板控制底水锥进。
再见,感谢您的光临,我们期望下次再为您服务。
简介。螺丝起子的倒角,起子前端锥度加工。
people were afraid that tourists might stop coning.
人们担心游客不再来了。
A study is made on the mechanism of bottom water coning in well and the shape of bottom water coning through barrier.
从研究底水突出油井的机理出发,讨论了底水上窜绕过夹层的过程。
围绕一口井下拉油气界面也会出现锥进。
As a prospect, a kind of new wind turbine generator based on coning rotor is discussed.
最后介绍一种新型锥形转子风力发电机组的设想。
Unfortunately, conventional numerical calculating method can not solve the water coning problem of large-fractured gas wells.
但是对有大裂缝的气田,普通数值方法结果无效,必须另辟途径。
锥进因过速开采而引起。
底水驱油藏单管采水抑锥射孔方案优化
失业回滞理论对安徽就业问题的普适性研究
气顶底水油藏直井开采最佳射孔位置和最佳射开厚度确定方法
摆式列车过曲线时的圆锥运动效应及其补偿算法研究
The error analysis in the measurment of a coning angle with a sine bar
用正弦规测量圆锥角实验的误差分析
考虑机抖激光陀螺信号滤波特性的圆锥算法修正
锥度对螺旋槽气体端面密封稳态特性的影响
注氮气控制稠油油藏底水水锥技术
1·In this study different dynamic models were constructed to search for the key parameters affecting the coning process in both single-well and Cartesian multi-well models.
在这项研究中,为了寻找影响锥进过程的关键参数,在单井和卡迪尔多井模型中建立了不同的动态模型。
2·The bilayer well completion-water drainage-oil production technology can inhibit the bottom-water coning to tap the productive potential of the reservoir and improve the development result of it.
双层完井排水采油技术可以抑制底水锥进,达到解放油层生产潜力、改善油藏开发效果的目的。
常用短语
cone crusher
cone crusher - 圆锥破碎机
cone angle
cone angle - 锥角,圆锥角;锥体角度
circular cone
circular cone - 圆锥,圆锥体
double cone
double cone - 双锥区;对顶圆锥;对顶锥
ice cream cone
ice cream cone - n. 冰淇淋蛋卷;盛冰淇淋的锥形杯
cone type
cone type - n. 锥形(扬声器)
同义词
v.
使成锥形;使成斜角(cone的现在分词)